Loading... Please wait...
Blog
Recent Posts
ESP32 Mini IoT Development Module with Color LCD, Microphone, Grove Interface, 4MB Flash for Arduino and UIFlow Programming
The M5Stick-C is a mini M5Stack, powered by the ESP32. It represents a portable, easy-to-use, open-source, IoT development module. The M5stickC is one of the core devices in the M5Stack product series as part of a continuously growing hardware and software ecosystem. It comes with a variety of compatible modules, as well as an open-source code and [...]
CAN Bus Termination Adapter Suitable For CAN Bus Interfaces With D-SUB9 Connector
The image below demonstrates a sample CAN Bus network. Two wires, CAN_H and CAN_L, connect all nodes, and the bus line is terminated by resistors, which are typically 120 Ω and are necessary to suppress any electrical reflections on the bus. According to ISO 11898-2, the termination resistor should be in the range of 100…130 Ω but [...]
COM Express Type 6 Module Powered By Intel Core i7/i5/i3 Or Intel Celeron Processor 4305UE For IoT Applications
Axiomtek announced the release of its CEM521, a COM Express Type 6 module powered by the latest 8th generation Intel Core i7/i5/i3 processor or Intel Celeron processor 4305UE (Whiskey Lake-U). It operates under harsh operating conditions with an extended temperature range of -40°C to +85°C (-40°F to +185°F). The 4K-ready system-on-module is suitable for graphics-intensive Industrial [...]
Webinar On Developing Custom Navigation, Localization And Attitude Applications For Autonomous Vehicles, Drones, Robotics
Aceinna and WPG Americas offer a webinar for developers of autonomous vehicle navigation products with CAN Bus interfaces. The webinar will take place on April 23, 2020, at 01:00 PM Eastern Time (US and Canada).The central topic will be about the use of Aceinna’s open-source IMUs (inertial measurement units) for developing guidance solutions for autonomous [...]
CAN Bus Programming With STM32, Developing with FreeRTOS, libopencm3 and GCC
Using FreeRTOS and libopencm3 rather than the Arduino software environment, this book will assist you in developing multi-tasking applications that go beyond Arduino norms. In addition to the standard peripherals found in the typical Arduino device, the STM32 system includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN Bus, and more.Each chapter includes precise [...]
Development Starter Kit For Industrial Machine Vision Artificial Intelligence (AI)
ADLINK Technology has introduced its Vizi-AI with Intel by presenting a development starter kit for industrial machine vision artificial intelligence (AI).The Vizi-AI starter development kit incorporates an Intel-Atom-based SMARC computer module with the Intel Distribution of OpenVINO toolkit and ADLINK Edge software. The development kit is now available through Arrow Electronics in the North America and EMEA [...]
CAN Bus Controllers Quickly & Easily Expand CAN Bus Networks For Machinery
E-T-A's flexible and compact SCS10, SCS20, and SCS30 CAN Bus controllers can plug into industry-standard vehicle sockets without additional wiring and configured using a graphical programming environment. In addition to defining CAN Bus messages, a large number of logical links and time functions are available. The SCS (Smart Control Systems) product group holds intelligent systems, power [...]
CAN Bus Hub With Three Female, One Male D-SUB9 Connector, And Adjustable Termination Resistor
The T-cannector v2 by Kvaser represents a CAN Bus hub with three female and one male D-SUB9 connectors. Used typically in application developments, the device offers an adjustable CAN termination resistor (120 Ohm, 60 Ohm, or unterminated). It renders an affordable and safe way of terminating a CAN Bus circuit, as well as applying power to devices that [...]
Compact Embedded ARM iMX6 UltraLite Computer Supports CAN Bus, Ethernet, USB, RS-232, RS-485
Technologic Systems launched their TS-7100, a small-size single-board computer with an optional DIN-mountable enclosure that measures 2.4" by 3.6" by 1.7". It is powered by the ARM iMX6 UltraLite microprocessor, and it ships with a variety of industry-standard interfaces, including Ethernet, USB, RS-232, RS-485, and CAN Bus. A Linux PC is recommended for development and will be assumed [...]
Design Concept: Ethernet Controller For Embedded IoT Systems And Automotive Networking
We at Copperhill Technologies have plans to create gateways for automotive networking, which includes serial protocols such as Automotive Ethernet, CAN (Controller Area Network), and LIN (Local Interconnect Network). The following focusses on the Ethernet part of the concept, where Ethernet also applies to Internet-of-Things (IoT) and Industrial-Internet-of-Things (IIoT) applications. The basic idea is to build [...]