Blog
Recent Posts
SAE J1939/16 Automatic Baud Rate Detection Process
The SAE J1939/16 document outlines the methods used to detect the baud rate of an SAE J1939 network segment by ECUs that can adjust their CAN baud rate while in use. The specified approach provides a reliable method to detect the CAN baud rate of that network segment without interrupting network communications. SAE J1939/16 defines the following requirements [...]
Single-Board ARM i.MX6 Computer Supports CAN Bus, WiFi, And Bluetooth
Versalogic introduced its Swordtail VL-EPC-2702 as part of a product series of ARM‑based embedded computers. It comes with an ISO 11898‑2‑compliant CAN Bus interface, which supports the 29-bit identifier extended frame format (CAN 2.0B) for SAE J1939 applications.Available with either the NXP i.MX6 Quad (quad-core), or the i.MX6 Duallite (dual-core) processors, the board carries an onboard Wi‑Fi, Bluetooth, [...]
SAE J1939 And The Challenging Migration From Classical CAN To CAN FD and CAN XL
The Society of Automotive Engineers (SAE) Truck and Bus Control and Communications Subcommittee has developed a family of standards concerning the design and use of devices that transmit electronic signals and control information among vehicle components. SAE J1939 and its companion documents have quickly become the accepted industry standard and the vehicle network of choice for off-highway [...]
Embedded ARM Cortex-A35 Modules With Up To Three CAN FD Interfaces
TQ-Systems (Germany) introduced their TQMa8xx and TQMa8xxs embedded modules that feature three, and respectively two CAN FD interfaces. The TQMa8xx module offers integrated graphics, a DSP (Digital Signal Processor) for audio processing, and security-related functions. To meet various requirements, three CPU (Central Processing Unit) alternatives with a dual-core or quad-core ARM Cortex-A35 processor are available. Each core supports a [...]
Introduction To The NMEA 2000 Marine Networking Standard
NMEA 2000 is a marine networking standard created and administered by the National Marine Electronics Association (NMEA). The NMEA is an association of marine electronics manufacturers, dealers, and technicians. The NMEA 2000 standard describes a low-cost, moderate capacity, bi-directional, multi-transmitter, multi-receiver instrument network. Typical data on a network using this standard include position latitude and longitude, [...]
Ultra-Low-Cost ARM Cortex M33 Development Board For IoT Applications
OKdo, a member of the Electrocomponents Group, launched its first own-branded single-board computer (SBC), the OKdo E1 Development Board. The introduction of the board represents the start of the next phase in the company's development towards producing an accessible range of software, hardware, services, and solutions, and is exclusively available from OKdo. With its focus on single [...]
USB/CAN Interface For Direct Connection To Embedded PC Motherboards
The CPC-USB/embedded by EMS Thomas Wunsche represents a CAN Bus interface designed for use with internal USB ports. Due to its compact size, it is well suitable for applications in embedded PCs. It is installed straight at a SUB-D9 enclosure opening or a slot panel, and it is wired per included cable to a pin connector of [...]
CODESYS Control For Raspberry Pi Allows PLC Programming According To IEC 61131-3
CODESYS is a PLC programming suite used by automation specialists as an environment for the development of controller applications. It is an IEC 61131-3 programming tool developed by the Germany-based company, 3S (Smart Software Solutions), providing users with integrated solutions that optimize the engineering of automated solutions. It represents a platform-independent development environment that is compatible [...]
Miniature PCB Mountable CANopen Servo Drive For Customized Robotics Applications
Ingenia, a member of Celera Motion (Novanta), released its Everest servo drive series with CANopen-connectivity. The Everest Core drive comes as a plug-in module, which can be integrated into a PCB (printed circuit board) in support of customized motion control applications. Everest Net drives are based on the Everest Core technology and incorporate CANopen communication. The CANopen interface complies [...]
AI Edge-Computing Embedded Box PC Powered By NVIDIA Jetson Platform
AAEON, a manufacturer of embedded AI and edge-computing solutions, announced it is releasing various integrated platforms, expanding a lineup of AAEON AI edge-computing solutions powered by the NVIDIA Jetson platform.The AAEON products implement interfaces required for edge computing in a small form factor, to create applications for all levels of users, from makers to more advanced [...]