Loading... Please wait...
Blog
Recent Posts
SAE J1939 Gateway - Updated Firmware And New Windows Data Monitoring & Recording Software
The JCOM.J939.USB-X SAE J1939 Processor board is an extended version of our popular JCOM.J9139.USB-B SAE J1939 ECU Simulator Board With USB Port. The most significant difference is that the -X version supports a USB transfer rate of up to 480 Mbps, allowing higher data throughput. The onboard real-time clock supports the timestamping of the SAE J1939 [...]
IoT Enabled ESP32 Module Supports Wireless CAN, SAE J1939, NMEA 2000 Applications
Copperhill Technologies introduces the ESP32 WiFi, Bluetooth Classic, BLE, CAN Bus Module to support IoT (Internet of Things) applications connected to CAN Bus, SAE J1939, and NMEA 2000 serial networks. The ESP32 is a series of low-cost, low-power system-on-chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth. It opened the door to a multitude of low-cost, high-efficiency IoT [...]
IoT-Enabled (Internet of Things) Controller Series For Harsh Environments Supports SAE J1939 And NMEA 2000
Divelbiss announced the introduction of its HEC-P2000 series of IoT-enabled (Internet of Things) controllers for harsh environments, including support for the SAE J1939 and NMEA 2000 serial protocols.The controllers are programmed using the Divelbiss' free-of-charge EZ Ladder toolkit, supporting programming languages such as Ladder Diagram, Function Block, and Structured Text, based on the P-Series PLC-on-a-chip (Programmable [...]
Contactless CAN Bus And SAE J1939 Data Monitoring With CANCrocodile
For the longest time, i.e. since the time we introduced our contactless CAN Bus readers, I had been eager to play with the CANCrocodile and read/monitor CAN Bus data traffic in a truly unique way. The setup, as shown in the above image, took less than 30 minutes to assemble (some soldering was required) and to finally [...]
SAE J1939 Starter Kit With Diesel Engine Simulation Plus VIN Request Demo
Our JCOM.J1939 Starter Kit And Network Simulator is designed to allow the experienced engineer as well as the beginner to experiment with SAE J1939 data communication without the need of connecting to a real-world SAE J1939 network, i.e. a diesel engine. It may sound obvious, but in order to establish a network, you need at least two [...]
Digital I/O Module For Operations In CANopen And CANopen FD Networks
Peak-System Technik and EmSA (Embedded Systems Academy) have joined forces and developed the PCAN-MicroMod FD DR CANopen Digital 1, an I/O device with eight digital inputs and eight outputs. The I/O module comes in a DIN-rail mountable housing with screw terminal strips. The eight digital inputs and eight digital outputs are galvanically isolated from the power supply, [...]
Automotive ECU Development With ARM Cortex Processor Supporting Up To Eight CAN FD Interfaces
The UDE (Universal Debugging Engine) by PLS (Germany) provides debugging and analysis functions for NXP’s S32S247 and i.MX RT MCUs with up to eight CAN FD (Flexible Data Rate) interfaces. The S32S247 multi-core controller combines four 800-MHz Cortex-R52 processors with 64-MiB integrated flash memory. Designed for safety-related real-time applications up to ASIL-D (automotive safety integrity level), the device is suitable [...]
PCI Express Mini Card With Two Electrically Isolated CAN FD Interfaces
ESD Electronics (Germany) introduced their CAN-M.2/402-2-FD PCIe card with two electrically isolated CAN FD (Flexible Data Rate) interfaces. The autonomous CAN Bus interfaces are controlled by the EsdACC (Advanced CAN Core) implemented in an Intel FPGA, and it is certified according to ISO-16845:2004. The FPGA supports direct memory access (DMA), also called “Bus mastering,” enabling autonomous data transfer [...]
SAE J1939 Gateway And Data Logger With Real-Time Clock - Update 08-07-2020
Our SAE J1939 Gateway And Data Logger is ideal for vehicle fleet management (trucks, buses, agricultural equipment, and any other diesel engine application), prototype field testing, diagnostics, or reverse engineering. The SAE J1939 Gateway And Data Logger records SAE J1939 message frames (PGNs) onto an onboard MicroSD memory card and timestamps them with a real-time clock (RTC). [...]
NXP ARM Cortex‑M7 Computer-On-Module With Dual CAN Bus Interface
F&S Elektronik Systeme (Germany) announced its PicoCore RT1, a compact-size controller (35 mm x 40 mm) with two CAN Bus interfaces.The computer-on-module integrates the 600‑MHz i.MX RT1050 ARM Cortex‑M7 from NXP. For the internal working memory, an SDRAM is available. For the program memory, SPI-connectable flash memory is offered. Additionally, an external SD-card slot is provided. The [...]