Loading... Please wait...
Blog
Recent Posts
Mini PCI-E Module with Classical CAN, CAN FD, and GNSS
Posted by on
Antzer Tech, a subsidiary of Innodisk, introduced their GADN-FD7L0 PC interface card, which integrates CAN (CAN bus 2.0 a/b, OBDII, SAE J1939), CAN FD, and GNSS features into one mini PCI-E combo module.
The board comes in a standard Mini PCI Express form factor. It supports USB 2.0 and two independent CAN FD ports with data-phase bit rates of 2 Mbit/s, 4 Mbit/s, and 5 Mbit/s. Furthermore, it offers Classical CAN connections using 11-bit CAN-IDs and bit-rates up to 1 Mbit/s with integrated programmable CAN-Identifier filtering and switchable termination resistors. The interface with a maximal power consumption of 0,55 W (3,3 VDC, 167 mA) extends the functionality of embedded systems, robotics, vehicles, etc.
The built-in U-Blox M8 GNSS (Global Navigation Satellite System) module enables concurrent reception of up to three GNSS sources (e.g., GPS, Galileo, Glonass, Beidou). Furthermore, the module, manufactured by Innodisk in Taiwan, supports the Linux SocketCAN driver and dead reckoning features. The industrial-grade design ensures reliable operation from -40 °C to +85 °C. In addition, Antzer Tech provides complete software materials for customers to verify and integrate the module into their applications.
GADN-FD Features
- Full-sized PCI Express Mini Card
- Meet the Requirements of the ISO 11898-1: 2015
- CAN FD baud rate support 2M, 4M, 5M
- CAN bus 2.0B backward compatible with 2.0A
- Support baud rate 125/250/500/800/1000K bps
- Built-in u-blox M8 GNSS module
- Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
- Support Dead Reckoning Features: UDR or ADR
- Built-in Programmable CAN Identifier Filtering
- Support Linux SocketCAN
- Termination resistor enabled/disabled by switch
- Industrial design, manufactured in Taiwan
Teensy 4.0 Triple Board With Two CAN 2.0B And One CAN FD Port With 240x240 IPS LCD And MicroSD
The Teensy 4.0 Triple CAN Bus Board with 240x240 IPS LCD And MicroSD is a Teensy 4.0 board with triple CAN Bus connections, two Classical CAN 2.0B, and one CAN FD. It can be powered by an external +12 VDC power supply with reverse voltage protection. Also included is a 240x240 wide-angle IPS TFT LCD display with microSD holder.
2G/3G Rapid Prototyping With ARM Mbed Enabled Internet Of Things Development Kit
The u‑blox C027 application board is an out‑of‑the‑box rapid prototyping solution for IoT (Internet of Things) applications that support GSM, UMTS and CDMA networks. The development board holds a MAX‑M8Q GPS/GNSS receiver and a LISA UMTS/CDMA or SARA GSM cellular module, enabling straightforward development of location‑aware, global communicating applications. For an even more natural development, the C027 incorporates [...]
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868
This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on. Features Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W Supports SMS, phone call, GPRS, [...]