Loading... Please wait...
Blog
Recent Posts
Dual Isolated CAN FD Interface Board For Raspberry Pi, Arduino, And Other Embedded Systems
The 2-Channel CAN Bus interface board by Copperhill Technologies was primarily designed with the Raspberry Pi in mind but is, nevertheless, also suitable for other embedded systems such as the Arduino family of CPU boards. The board supports two CAN FD (CAN with Flexible Data-Rate) ports with a data rate of up to 8Mbps. It features [...]
Beaglebone AI Family Comes With Two Classical CAN Bus Interfaces; CAN FD Support Is Planned
The Beaglebone AI board bridges the gap between small single-board computers (SBCs) and more robust industrial computers. Leveraging the Texas Instruments (TI) Sitara AM5729 processor, developers have access to powerful machine learning capabilities with the ease of the Beaglebone Black header and its mechanical compatibility.The board contains TI C66x digital-signal-processor (DSP) cores and embedded-vision-engine (EVE) cores on [...]
CAN FD Evaluation And Development Board For Windows PCs
Peak-System announced their PCAN-Micromod FD, a generic solution for the integration of a CAN FD interface and I/O functionality into custom hardware.Developers can plug the CPU module into their motherboard and configure it with the Windows-based PCAN-Micromod FD software included in the scope of delivery. The configuration is applied to the PCAN-Micromod FD via the [...]
NXP i.MX8X System-on-Module (SoC) With Up To Three CAN FD Ports
Compulab (Israel) introduced their CL-SOM-iMX8X System-on-Module (SoM) whose processor is part of NXP’s i.MX8X System-on-Chip (SoC) family and provides three CAN FD ports. The module has been created with the vast I/O capabilities of the i.MX8X SoC in mind. Besides the three CAN FD ports, other peripheral interfaces include PCI Express, dual 1-Gbit/s Ethernet, USB ports, four UARTs, [...]
CAN FD On A Legacy CAN Bus Network Is Not A Good Idea Due To Compatibility Issues
My book, A Comprehensible Guide to Controller Area Network, was initially published in 2005, and while the technology behind the "Classical" CAN (a tag used by CAN-In-Automation) has not changed, the growing market acceptance of CAN FD (Flexible Data Rate) made me think about working on a second edition. I am aware that CAN FD was [...]
Texas Instruments Introduces MCU With EtherCAT, Ethernet, And CAN FD Connectivity
Texas Instruments (TI) has introduced their F2838x MCU, designed for AC servo drives and other industrial automation devices. The 32-bit MCU is part of the C2000 micro-controller family. The MCU allows designers the utilization of a single chip to achieve serial connectivity, including EtherCAT, Ethernet, and CAN FD. Devices equipped with such communication ports frequently necessitate an external [...]
CAN-in-Automation (CiA) To Launch CAN XL During International CAN Conference
Today, CAN-in-Automation (CiA - not related to the American Homeland Security Department) announced its intention to launch yet another flavor of the ever-popular CAN Bus technology, namely CAN XL, which supports an extra-large (XL) payload of up to 2048 bytes. For more information on CAN XL, we have to wait until after the announcement during the [...]
CAN FD Controller With Integrated CAN Transceiver And SPI Interface
Texas Instruments has introduced their TCAN4550, a CAN FD stand-alone controller with integrated (on-chip) transceiver. The TCAN4550 represents an interface between a CAN Bus network and a host controller through a serial peripheral interface (18-MHz SPI).It supports the Classical CAN and the CAN FD data link layer. In addition, the chip comes with CAN FD transceiver functionality: differential [...]
CAN FD To USB Gateway Project With Teensy 3.2 And Microchip MCP2517FD CAN FD Controller
Our Teensy 3.2 With CAN FD Breakout Board provides all the components needed to create your CAN FD to USB-Micro Gateway. The board comes with the Microchip MCP2517FD CAN FD controller, while the Teensy 3.2 provides the USB connection. It also has an onboard 5 VDC regulator and reverse-voltage protection. The MCP2517FD is a cost-effective and small-footprint CAN [...]
Windows-Based Analysis And Test Environment For CAN -FD, LIN And Automotive Ethernet
CanEasy by Schleissheimer (Germany) is a Windows-based analysis and test system for CAN-FD, LIN and Automotive Ethernet. The tool simulates serial bus traffic, it provides a high degree of automation and is easily configured and extended with the support of plug-in modules. The goal is that users should focus on their task and not on their tools. CanEasy is a [...]