Loading... Please wait...
Blog
Recent Posts
Reference Board With Galvanically Isolated CAN Bus Transceiver Supports Bit Rates Up To 5 Mbit/s
Recom introduced their R-REF03-CAN1 Reference Board to demonstrate the ISO1042 isolated CAN Bus transceiver in combination with the R1SX-3.305/H isolated DC/DC converter. The reference board requires only a single 3.3 VDC external power supply. A green LED indicates the presence of the VCC2 supply on the secondary (CAN Bus) side. The reference board enables designers to develop [...]
CANopen I/O Modules With CAN FD Capability
Microcontrol announced its μCAN.8.dio-Snap I/O module with CANopen FD support. For more than 20 years, Microcontrol - based in Troisdorf near Cologne/Germany - has specialized in producing CAN applications for demanding industries as, for instance, mechanical and automotive industries but also renewable energy and medical technology. They provide solutions to transmit analog measurement signals to a Fieldbus interface [...]
Isolated CAN Transceiver With 70-V Bus Fault Protection and Flexible Data Rate (CAN FD)
Texas Instruments (TI) has introduced two more CAN Bus transceivers. They offer ±70-VDC bus-fault protection and ±30-V common-mode voltage range. The ISO1042 and ISO1042-Q1 help engineers protecting low-voltage circuits and increase communication bandwidth in industrial applications such as grid infrastructure, motor drives and building automation, as well as hybrid electric vehicles and electric vehicles (HEVs/EVs). Used in conjunction [...]
SAE J2534-1 And J2534-2 Device Supports CAN FD Plus Four CAN Bus Channels
Drew Technologies (USA) improved their J2534 devices by adding a CAN FD port. The Cardaq-Plus3 complies with the SAE J2534-1 and J2534-2 application programming interface specifications. It comes with one CAN FD and four standard CAN Bus interfaces. Additionally, it supports DoIP (Diagnostics over IP), which goes beyond the three-port requirement for some Chrysler/FCA models.Also, the product features High-Speed USB [...]
CAN Bus, CAN FD, LIN, J1939, And CANopen Network Analysis Tool
Warwick Control Technologies, a UK company, has released version 3.11.0 of its X-Analyzer network analysis tool. The software provides standard CAN Bus, CAN FD, and LIN all-in-one tool, along with higher-layer protocols such as SAE J1939 and CANopen. When purchased in combination with the Kvaser Hybrid or Hybrid Pro interfaces, the product can be used with standard CAN [...]
CompactPCI Multi I/O Board With CAN FD Capability
The SBF-Crossover from EKF is a peripheral slot card for CompactPCI serial systems, and it provides CAN FD capabilities. The board comes with four single USB 3.0 compliant controllers, and two Gigabit Ethernet NICs, all wired for front I/O. Also, a PCI Express Mini Card socket is provided onboard, which is useful, e.g. for a Fieldbus I/O module such [...]
CompactPCI Board Features Up To 16 CAN FD Ports
EKF (Germany) has introduced their SF2-Candy quad PCI Express Mini card carrier board, which supports up to four PCIe‑based modules, each providing four CAN FD channels.The CAN FD interfaces of the SF2-1080-Candy modules provide up to four CAN FD ports. The CAN FD interfaces are available at 25-pin or 50‑pin D-sub connectors. Each CAN FD port is [...]
Arm Cortex-M33 Micro-Controller With CAN FD For Secured IoT (Internet-of-Things)
STMicroelectronics introduced their cyber-protection to power-conscious connected devices with the STM32L5 micro-controller (MCU) series featuring the Arm Cortex-M33 core, which also provides a CAN FD interface.Building on the Cortex-M33, boosting protection for small devices by integrating ARM's Trustzone hardware-based security, the STM32L5-series MCUs add further enhancements. They include software isolation, secure boot, key storage, and hardware [...]
Mini PCI Express Real-Time Interface For CAN Bus Or CAN FD
Kvaser announced their Mini PCI Express HS v2, a single-channel and a dual-channel Mini PCI Express interface boards with low latency designed for real-time environments. The two single- and dual-channel interfaces communicate with the PC over the PCI Express system bus, allowing for real-time performance and 1 µs time-stamping. They support both Classical CAN and CAN FD and [...]
CAN-to-CAN Bridge/Router with CAN FD Support Plus CAN Bus To Ethernet interface For Cloud Connectivity
HMS/IXXAT announced their Service Pack 1 (SP1) for the Ixxat CANbridge NT and CAN@net NT. This includes added features such as configurable and event-triggered Action Rules, and straight-forward cloud connectivity via MQTT. SP1 introduced Action Rules for CANbridge NT and CAN@net NT, allowing users to define a variety of actions to be performed automatically in response to received [...]