Product Description

Free Shipping Within The United States!

Further Shipment Information & Options...

Raspberry Pi 4 2GB

Raspberry Pi 4 with heat sinks The Raspberry Pi 4 offers ground-breaking improvements in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation boards while preserving backward compatibility. The Raspberry Pi 4 provides desktop performance comparable to entry-level x86 PC systems.

Due to the higher power requirements, the Raspberry Pi 4 requires at least a 3.0A USB-C power supply, which is not included in the scope of delivery. A USB-C 3.5A power supply (UL Listed) is optional (see selection above); it is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.

Add to order: Raspberry Pi 4 Model B Official PSU, USB-C, 5.1 VDC, 3A, US Plug, Black...

The Raspberry Pi 4 comes with an installed set of 3 Aluminum Heat Sinks to keep the board cool.

The standard HDMI port that was part of previous generation Raspberry Pi generation boards is replaced on the Raspberry Pi 4 by two Micro HDMI ports to provide dual monitor support. A 4K60P Micro HDMI to HDMI cable (not included in delivery) is required or two cables for dual monitor operation.

PiCAN3 CAN Bus Board for Raspberry Pi 4 with 3A SMPS And RTC

PiCAN3 CAN Bus Board for Raspberry Pi 4 with 3A SMPS And RTC The PiCAN3 board with SMPS (Switch Mode Power Supply) and RTC provides CAN-Bus capabilities for the Raspberry Pi 4. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via DB9 or the onboard 3 way screw terminal.

The Switch Mode Power Supply (SMPS) allows connecting an input voltage range of 6 VDC to 20 VDC suitable for industrial and automotive applications and environments. The SMPS will power the Raspberry Pi plus PICAN3.

There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.

The onboard PCF8523 is a CMOS Real-Time Clock (RTC) and calendar chip optimized for low power consumption. Data is transferred serially via the I²C-bus with a maximum data rate of 1000 kbit/s. Alarm and timer functions are accessible with the opportunity to produce a wake-up signal on an interrupt pin. An offset register allows fine-tuning of the clock. The PCF8523 has a backup battery switch-over circuit, which detects power failures and automatically switches to the battery supply when a power failure occurs.

Note: The content of delivery does not include the CR 1220 battery.

Power Supply

The Raspberry Pi 4 With PICAN3 CAN Bus HAT provides two power conenctions:

You can use the included USB-C power supply for operation in an office/lab environment.
The onboard SMPS (Switch Mode Power Supply) allows operation in an industrial control environment or in a vehicle.

Operating System

The Raspberry Pi 4 With PICAN3 CAN Bus HAT comes with a pre-installed Raspbian operating system. All CAN port drivers are installed and tested.

Enclosure

Must be ordered separately:

Plastic Enclosure for PiCAN3 and Raspberry Pi 4...

Resources

PiCAN3 CAN Bus Board for Raspberry Pi 4 with 3A SMPS And RTC...

Documentation

Development Resources incl. Sample Code

Note: The programming samples, other than those for the RTC, are identical to those of the PICAN2:

Raspberry Pi 4 Beginner’s Guide

Better performance: The new Raspberry Pi 4 comes with a new, updated processor and RAM, which guarantees you a new desktop experience. Fast networking: The Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth. RAM: Raspberry Pi 4 comes in three variants based on RAM: 1 GB, 2 GB, and 4 GB.

Learn to work with Python, GPIO pins and sensors, the Pi Camera Module, and build amazing projects like a Pro!

This guide offers you the information you need to master the Raspberry Pi 4 as a beginner! It walks you through everything you need to know to use the platform to the fullest.

Here is a preview of what you will learn:

Understand what the Raspberry Pi 4 is and how to set it up
Understand how to connect remotely to your Raspberry Pi 4 and run it
How to work with GPIO pins and read external inputs and sensors (buttons and PIR sensors)
How to work with LED Cameras
How interact with scratch and programming
And so much more...

More Information...