Blog
Recent Posts
In-Vehicle Security Development Kit With CAN Bus And CAN FD Message Authentication
Microchip Technology introduced their CryptoAutomotive In-Vehicle Network (IVN) TrustAnchor/Border Security Device (TA/BSD) development kit. This kit is designed to enable OEMs and Tier 1 suppliers to introduce security to networked vehicle systems, starting in areas of priority, without disruption elsewhere. The CryptoAutomotive TA/BSD development kit emulates a secure node in an automotive network and provides system [...]
CAN With Flexible Data Rate (CAN FD) Devices For Embedded Systems Such As Raspberry Pi, Arduino, And Teensy
Developed by Bosch (Germany), CAN with Flexible Data Rate (CAN FD) is an extension to the original CAN Bus protocol as specified in ISO 11898-1 that responds to increased bandwidth requirements in automotive and industrial networks. CAN FD is supported by semiconductor chip manufacturers and end users alike, with Infineon, NXP, Daimler and GM among the [...]
Embedded Platform For Automotive Applications Supports CAN Bus And CAN FD
The FRC-EP170 and the FRC-EP190 by HMS/IXXAT are universally usable hardware platforms for applications on the test bench or in vehicles. Among others, the devices provide classical CAN Bus and CAN FD interfaces. Expansion slots enable to add other interfaces, including WLAN, GSM, or GPS. Both devices have the same processor and the same operating system, making the new variant completely [...]
PCIe Board Supports Up To Four Isolated CAN Bus Or CAN FD Ports
The PCAN-M.2 by PEAK System allows the connection of classical CAN Bus and CAN FD networks via M.2 interface (PCI Express, PCIe) as supported by modern computers. With its small form factor, the plug-in card is ideal for embedded PCs, single-board computers (SBC), and compact embedded applications. There is a galvanic isolation between the computer and the CAN side, [...]
Teensy-Based CAN FD Demo Board With 2.8" TFT LCD
SK Pang Electronics has introduced their CAN FD demo board with 2.8" TFT LCD. It is based on Microchip’s MCP2517 stand-alone CAN FD controller. The demo board features the Teensy 3.6 plug-in module by Sparkfun. The CAN FD port is realized using the Microchip MCP2517FD stand-alone CAN FD controller and the MCP2562FD transceiver. The stand-alone controller provides 31 FIFOs, configurable as [...]
Versatile PC Diagnostics Interface With CAN Bus, CAN FD, And LIN Ports
The VCI-Muxdiag-3 by Exxotest (France) is a versatile PC interface. It is particularly suitable for communication analysis and diagnostics applications on multi-bus vehicle architectures. The product is compatible with the following communication channels: Classical CAN Bus, CAN FD, LIN, and more. The dimensions of 131 mm x 65 mm x 25 mm make it possible to transport the product for [...]
Programmable Controller With CAN FD And Ethernet Ports For Commercial Vehicle Applications
Bosch Rexroth, in cooperation with Bosch, has developed and offers controllers for mobile working machines. It combines multiple features, such as free programmability with a new hardware architecture and a software concept within the framework of the Bosch electric/electronic (E/E) architecture for commercial vehicles and mobile working machines.In addition to advanced multi-core processors, it uses ASICs [...]
PCI Board With Isolated Dual CAN Bus FD Interface According To ISO 11898-2:2016
esd electronics announced the release of their CAN-PCI/402-2-FD, a PC board designed for the PCI bus that features two electrically isolated high-speed CAN FD interfaces according to ISO 11898-1:2015. The CAN FD interfaces are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented in the Altera® FPGA.The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory. This results [...]
USB Module with 2 CAN FD Interfaces Plus Analog And Digital IRIG-B Inputs
The CAN-USB/400-FD by esd electronics is equipped with two independent CAN FD interfaces according to ISO 11898-1:2015; they are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented in an Altera® FPGA. The interface is able to send and receive ISO conform CAN FD (up to 5 Mbit) or CAN 2.0 A/B messages. The CAN [...]
PCI/104-Express Interface Supports Up To Four CAN FD Ports
Peak-System introduced their PCAN-PCI/104-Express FD interface board, which is now available as single, dual, and four-channel version. Up to four cards can be stacked for access to Classical CAN Bus and CAN FD networks.The connection to the CAN network is made via the D-sub slot brackets included in the delivery. Stack-through connectors for the PCI bus are [...]