Loading... Please wait...
Blog
Recent Posts
CAN FD Kit With Dual CAN FD Transceiver, Ethernet, And RS232C Interface
NXP has announced their OM13094 LPCXpresso54618 CAN-FD kit. It provides a dual CAN/CAN-FD transceiver for use with CAN-enabled LPCXpresso V3-style boards. The board features the NXP TJA1059 dual transceiver, plus an EIA-232C transceiver. The module is compatible with all the LPCXpresso546xx boards (although LPCXpresso54608 only supports Classical CAN, not CAN FD). Jumpers are used to enable or disable CAN [...]
Microchip Cortex M0+ Evaluation Board With CAN FD Transceiver
Microchip introduced their SAMC21N Xplained Pro Evaluation Kit, a development board for its ARM-based MCUs featuring CAN FD connectivity. The products are equipped with the company’s CAN transceivers qualified for 5 Mbit/s.The evaluation kit is supported by the Studio integrated development platform. It includes an on-board Embedded Debugger, eliminating the need for external tools to program or [...]
STM32 Development Board Implements CAN FD On-Chip Modules, Supports Arduino And ARM mbed Platforms
ST Microelectronics announced their Nucleo-144 boards, featuring an STM32 micro-controller in an LQFP144 package. The board’s Zio connector enables connection to Arduino Uno V3. The development board does not require any separate probe as it integrates the Link/V2-1 debugger/programmer. It comes with Ethernet and USB connectors. The board is not equipped with CAN transceiver, although the STM32 [...]
XMC And PMC CAN Bus interface Board With Four CAN FD Ports
ESD Electronics has expanded their 402 series of CAN boards with two mezzanine systems, XMC and PMC, both providing a CAN Bus interface board with four CAN FD ports. The XMC-CAN/402-4-FD and PMC-CAN/402-4-FD are able to send CAN frames back-to-back over four channels. The interface-boards handle 100 % bus load and support the CAN FD protocol. These cards are [...]
Coming Soon - CAN-Bus FD Board For Raspberry Pi 3
Developed by Bosch, CAN with Flexible Data-Rate (CAN FD) is an extension to the original CAN protocol as specified in ISO 11898-1, which responds to increased bandwidth requirements in automotive networks. CAN FD has the support of semiconductor chip manufacturers and end users alike, with Infineon, NXP, Daimler and GM among the companies behind the new [...]
Low-Cost, High-Performance Vehicle Network Interface Family With 4 CAN Bus and CAN FD Ports
Intrepid Control Systems, Inc. has announced their ValueCAN4 family, which also provides optional Ethernet (DoIP) and LIN connectivity. The device supports up to 1 Mbit/s for CAN bus connectivity and up to 10 Mbit/s for CAN FD communication. The ISO 11898-2 standard specifies currently transceiver chip parameters for 5 Mbit/s. The dongle family complies with USB 2.0 [...]
ARM Processor With Independent Hardware Security Module Protects CAN Bus Networks From Cyber Threats
The STA1385 by STMicroelectronics is a fully automotive, power efficient System-On-Chip (SoC), targeting cost effective processing solutions for innovative Telematics and Connectivity applications including Cyber-security protection. It features a powerful Dual ARM Cortex-A7 processor, an embedded and independent Hardware Security Module (HSM), an isolated sub-system based on ARM Cortex-M3 for vehicle CAN interfaces and a full set of [...]
Multi-Core Microcontroller (MCU) With Up To Eight CAN FD Ports Aimed At Automotive Applications
The SPC58 product family by STMicroelectronics is the latest in the line enhancing the scalability, connectivity, and security of automotive applications, including standalone, integrated, and smart gateways, firmware updates over-the-air, electric-vehicle battery management, access control, lighting and body control units, domain controllers, and advanced park maneuver assistance. Premium vehicles today typically have around 130 electronic control units (ECUs). These [...]
CAN FD Controller Board With High-Speed CAN Transceiver And SPI interface
Microchip announced their MCP2517FD, a stand-alone CAN FD controller, which allows designers a simplified path to upgrade from standard CAN to CAN FD. The CAN FD controller provides an SPI interface to link it to the host controller. The CAN FD protocol offers higher data rates and payloads up to 64 byte. The MCP2517FD can be used [...]
ARM Cortex-M4F Microcontroller With CAN-FD (Flexible Data Rate) Ports
The SAM D5x and SAM E5x microcontroller (MCU) families are available from Microchip Technology. These 32-bit MCU families offer connectivity interfaces, performance and hardware-based security for a variety of applications.E5X Device Options:E51 (2 X CAN-FD)E53 (Ethernet MAC)E54 (2 X CAN-FD and Ethernet MAC)The SAM D5/E5 microcontrollers combine the performance of an ARM Cortex-M4 processor with a Floating [...]