Loading... Please wait...
Blog
Recent Posts
CompactPCI Serial Board With Altera FPGA Manages Four CAN FD Ports via DSUB25
Posted by on
The CPCIserial-CAN/402-4-FD board by esd electronics comes with four independent CAN FD interfaces via DSUB25 according to ISO 11898-1:2015. The CAN FD interfaces are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented by using the Altera FPGA.
With a higher bit rate in the data phase, in combination with the increase of efficiency by a higher number of user-data bytes, CAN FD offers a higher data throughput while keeping the advantages of the Classical CAN Bus.
CPCIserial-CAN/402-4-FD is fully backward compatible with the CAN Bus and thus supports any Classical CAN Bus applications.
The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory, which results in a minimization of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load.
Due to the application of MSI (Message Signaled Interrupts), the CPCIserial-CAN/402-4-FD operates, for example, in Hypervisor environments. The CPCIserial-CAN/402-4-FD provides high-resolution 64-bit hardware timestamps for CAN Bus messages.
CAN-Bus CAN FD Breakout Board 5VDC
This is a CAN-Bus breakout board with Flexible Data Rate using the Microchip MCP2561FD chip. The output pins are on both screw terminals and a DB9 connector. The DB9 can be configured for use with an OBDII cable, SAE J1939 cable, or CAN Analyzer pin-out via solder bridges.
Features
- Microchip MCP2561FD CAN FD transceiver
- 5 VDC supply
- Supports up to 6 Mb/s operation
- Implements ISO-11898 and ISO-11898-5 standard physical layer requirements
- Up to 112 nodes can be connected
- DB9 and screw terminal connection
- DB9 can be configure for OBDII cable or CAN Analyser pin-out
- 120 Ohm terminating resistor via jumper
Wide Range of Industrial-Strength CAN Bus FD Interface Products
esd electronics has extended their CAN Bus FD (CAN with flexible data rate) product line to cover form factors such as CompactPCI, XMC mezzanine, PMC mezzanine, PCI Express, PCI Express Mini, and a USB gateway. The new boards include the CPCIserial-CAN/402-4-FD, the mezzanine boards XMC-CAN/402-4-FD and PMC-CAN/402-4-FD, the CAN-PCIe/402-FD and the CAN-PCIeMini/402-2-FD as well as the module CAN-USB/400-FD. The [...]