Loading... Please wait...
Blog
Recent Posts
CompactPCI Serial Board With Altera FPGA Manages Four CAN FD Ports via DSUB25
Posted by on
The CPCIserial-CAN/402-4-FD board by esd electronics comes with four independent CAN FD interfaces via DSUB25 according to ISO 11898-1:2015. The CAN FD interfaces are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented by using the Altera FPGA.
With a higher bit rate in the data phase, in combination with the increase of efficiency by a higher number of user-data bytes, CAN FD offers a higher data throughput while keeping the advantages of the Classical CAN Bus.
CPCIserial-CAN/402-4-FD is fully backward compatible with the CAN Bus and thus supports any Classical CAN Bus applications.
The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory, which results in a minimization of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load.
Due to the application of MSI (Message Signaled Interrupts), the CPCIserial-CAN/402-4-FD operates, for example, in Hypervisor environments. The CPCIserial-CAN/402-4-FD provides high-resolution 64-bit hardware timestamps for CAN Bus messages.
CAN-Bus CAN FD Breakout Board 5VDC
This is a CAN-Bus breakout board with Flexible Data Rate using the Microchip MCP2561FD chip. The output pins are on both screw terminals and a DB9 connector. The DB9 can be configured for use with an OBDII cable, SAE J1939 cable, or CAN Analyzer pin-out via solder bridges.
Features
- Microchip MCP2561FD CAN FD transceiver
- 5 VDC supply
- Supports up to 6 Mb/s operation
- Implements ISO-11898 and ISO-11898-5 standard physical layer requirements
- Up to 112 nodes can be connected
- DB9 and screw terminal connection
- DB9 can be configure for OBDII cable or CAN Analyser pin-out
- 120 Ohm terminating resistor via jumper
CompactPCI Board Features Up To 16 CAN FD Ports
EKF (Germany) has introduced their SF2-Candy quad PCI Express Mini card carrier board, which supports up to four PCIe‑based modules, each providing four CAN FD channels.The CAN FD interfaces of the SF2-1080-Candy modules provide up to four CAN FD ports. The CAN FD interfaces are available at 25-pin or 50‑pin D-sub connectors. Each CAN FD port is [...]