Loading... Please wait...
Blog
Recent Posts
Classical CAN, CAN FD, And LIN Kit Simulates Devices And Networks For SAE J1939, NMEA 2000, CANopen
Warwick Control Technologies has released a development kit that enables users to simulate Classical CAN, CAN FD, and LIN devices and networks. It also supports the simulation of SAE J1939, NMEA 2000, and CANopen devices and networks. The kit comes with the Kvaser Hybrid Pro two-channel interface to test Classical CAN, CAN FD, and LIN systems through [...]
Marine Flow Meter With SAE J1939 Interface For Fuel Consumption Measurement
The DFM Marine flow meter by Technoton represents a system for the direct measurement of fuel consumption in engine lines or fuel lines of boilers/burners, designed for fuel systems with hourly consumption from 20 to 4,000 l/h. The CAN Bus / SAE J1939 interface provides more than sixty useful parameters and counters, transmits data (PGN) according to the SAE J1939 [...]
SAE J1939 To USB Gateway Records J1939 Data Frames (PGNs) To Micro SD Card
As of today, we have accomplished another milestone toward full SAE J1939 data recording using our SAE J1939 Gateway Module With USB Port, RTC, MicroSD Memory Card. The device's firmware now allows the recording of SAE J1939 data frames (PGNs) to the onboard microSD card without requiring a PC connection. The previous version supported the data [...]
SAE J1939 Data Traffic Simulation, Monitoring And Data Logging Devices
Copperhill Technologies offers various SAE J1939 data traffic simulation and monitoring devices that also support data logging. All of these devices are based on industrial-strength hardware, operating under an extended temperature range of -40 to +85 Celsius and making them suitable for operation within offroad vehicles and lab test conditions. The JCOM series of SAE J1939 [...]
Controller Area Network (CAN Bus) And Higher-Layer Protocols CANopen, SAE J1939, NMEA 2000
For the longest time, the major misconception about Controller Area Network (CAN) was that it merely applies to automobiles. The truth is, CAN, since its introduction in 1986, proved to be a robust, versatile, and straightforward technology and, consequently, the CAN Bus technology found its way into all areas of applications where microprocessors need to [...]
CAN Bus Display For Auto-Scanning And Parsing CAN And ISOBUS Data
The MasterCAN Display 35 by Technoton was designed to visualize machinery operation parameters from CAN Bus and ISOBUS networks, specifically telematics sensors such as fuel level sensors, fuel flow meters, axle load sensors, and other peripheral units. The CAN Bus display is suitable for vehicle telematics systems or stationary machinery monitoring systems. It can show up to 402 [...]
Powerful CAN Bus, SAE J1939 Display For On-Board Data Monitoring
Technoton introduced its MasterCAN Display 35, which is designed to visualize the operating parameters of a vehicle or stationary object. The Display 35 receives and parses data from an SAE J1939/S6 interface and standard vehicle T-CAN bus. Two analog inputs allow the connection to voltage/frequency devices – standard or additional sensors like axle load sensor. The MasterCAN [...]
SAE J1939 Gateway And Data Logger With Real-Time Clock - Update 09-04-2020
Our SAE J1939 Gateway And Data Logger is ideal for vehicle fleet management (trucks, buses, agricultural equipment, and any other diesel engine application), prototype field testing, diagnostics, or reverse engineering. The SAE J1939 Gateway And Data Logger records SAE J1939 message frames (PGNs) onto an onboard MicroSD memory card and timestamps them with a real-time clock (RTC). [...]
SAE J1939 Electronic Logging Device (ELD) Simulation And Data Monitoring With Timestamp Under Linux
The following describes a method of sampling and recording SAE J1939 data to any Linux device, PC or Embedded. Naturally, in order to read and request SAE J1939 data, you will need additional hardware, such as a CAN Bus (Controller Area Network) interface board (unless you use an embedded Linux system with onboard CAN port). The [...]
Updated Version Of JCOM1939 Windows Software For Monitoring And Recording SAE J1939 Data Traffic
The JCOM1939 Monitor Software for Windows complements our JCOM.J1939.USB gateway board, a high-performance, low-latency vehicle network adapter for SAE J1939 applications. The gateway allows any host device with a USB COM port to monitor and record SAE J1939 data traffic and communicate with an SAE J1939 vehicle network. The board supports the full SAE J1939 protocol according to J1939/81 [...]