Loading... Please wait...
Blog
Recent Posts
PMC (PCI Mezzanine Card) Interface Supports CAN Bus, CAN FD, FlexRay, 100BASE-TX and 100BASE-T1
Posted by on
The Flexcard PMC-II by Star Corporation is an interface device for automotive bus systems connecting up to eight Classical CAN or CAN FD networks to a host controller.
The eight ports are configurable regarding the physical layer (Flextiny II) with switchable bus termination resistors included onboard.
All interfaces are synchronized by employing time-stamps with a resolution of one microsecond. The product provides various triggering options. Driver programs for Linux, Windows, and Xenomai are available.
The PCI interface is powered by 3,3 VDC or 5 VDC. The Classical CAN BUs and CAN FD protocol controllers are based on the IP cores from Bosch.
Features
- 8x exchangeable bus interfaces, PMC interface (PCI Mezzanine card)
- Physical Layer available for CAN, CAN FD, FlexRay, 100BASE-TX and 100BASE-T1
- Synchronous timestamp generation for all of the 8 bus interfaces (resolution 1 us)
- PMC-Adapter available for: PCI and PCIe
- Driver available for: Windows, Linux and Xenomai
- Numerous triggering options
- Switchable on-board bus termination
- Analysis software included
Teensy 3.6 CAN 2.0B and CAN FD Breakout Board
This is a Teensy 3.6 board with CAN 2.0B and CAN FD interface. The CAN FD is supplied by the Microchip MCP2517FD CAN FD controller with MCP2562FD CAN FD transceiver. There is also a socket for a 128x64 (I2C) OLED display (not included in delivery).
Features
- Teensy 3.6 (installed)
- CAN 2.0B interface
- CAN FD interface
- On board voltage regulator (Input voltage range 6 VDC to 14 VDC)
- Reverse supply voltage protection
- 120R terminator
- 5-way navigation switch
XMC And PMC CAN Bus interface Board With Four CAN FD Ports
ESD Electronics has expanded their 402 series of CAN boards with two mezzanine systems, XMC and PMC, both providing a CAN Bus interface board with four CAN FD ports. The XMC-CAN/402-4-FD and PMC-CAN/402-4-FD are able to send CAN frames back-to-back over four channels. The interface-boards handle 100 % bus load and support the CAN FD protocol. These cards are [...]