Compact and Robust Joystick Supports SAE J1939, CANopen Interfaces
Genge & Thoma AG introduced its series of joysticks for industrial and mobile applications with CANopen and SAE J1939 connectivity. The products address applications, including off-road vehicles and vehicle body applications.
The SK 60 joystick is a versatile product with several options with various haptic characteristics. The product is available in numerous configurations, with up to three axes depending on the handle. In the core of the joystick is a hall-effect sensor. In addition, the IP67-rated joystick comes optionally with a CAN Bus interface supporting the CANopen or SAE J1939 protocol stacks.
The SK197 joystick provides up to three axes based on potentiometer technology. The IP54-rated product also supports CANopen and SAE J1939. Therefore, it is suitable for remote control devices.
The SK212 multi-function joystick will operate under harsh environmental conditions. The IP65-rated product is appropriate for mobile hydraulics, agriculture, construction machines, and off-shore equipment. The joystick uses hall-effect sensors. Additional switches, thumbwheels, etc., can be applied. The product is available with CANopen and J1939 ports.
The Swiss company, established in 1958, exports about 90 percent of its joysticks. It has sales partners in many European countries, the U.S.A, Australia, China, Taiwan, and India. The company is a CiA member since 2017.
SAE J1939 Starter Kit And Network Simulator
The SAE J1939 starter kit allows you to monitor, simulate, and record any PGN as defined in the SAE J1939-71 Standard but also including diagnostic messages according to SAE J1939-73.
The starter kit was not designed to simulate specific diesel engines, but if you enter all PGNs that are being used, you can design and simulate any diesel engine.
SAE J1939 Enabled Temperature Scanner Monitor up to 20 Thermocouples and Two RTDs
Axiomatic, a designer and manufacturer of electronic controllers and power management converters, introduced their AX180800 temperature scanner that monitors up to 20 thermocouples and two RTDs. The device features two SAE J1939 interfaces. The channels are independently configurable as Type J, K, B, E, N, R, S or T thermocouples, measuring exhaust, winding, and fluid temperature. All temperature data are [...]
Thomson Electrak Linear Actuator with SAE J1939 Interface for Railway and Industrial Applications
For many years I maintained the view that the SAE J1939 protocol, specifically its advanced network management capabilities, provides many great features to support any industrial application. SAE J1939 is an ingeniously designed protocol with very little protocol overhead, requiring only a minimal memory footprint that benefits the use of small embedded systems. I am now [...]
Arduino Based CAN Bus, LIN Bus Development And Prototyping Boards For Automotive And Industrial Applications
Teensy is a line of Arduino-compatible boards designed to offer maximum I/O capabilities, backed up by a slew of fully featured software libraries designed to run on Arduino. The Teensy is a complete USB-based microcontroller development system in a minimal footprint, and it is capable of implementing many types of projects. All programming is done [...]
Single-Port Inline USB Isolator For Industrial And Medical Applications
The SeaISO ISO-1 single-port, inline USB isolator by Sealevel Systems, Inc. offers an easy-to-use method of protecting host and field equipment from damaging transients and surges commonly found in commercial, industrial and medical environments. The ISO-1 is UL Recognized, in accordance with EN60601-1 3rd Edition, and protects both the data and power lines with 4 kV of [...]