Loading... Please wait...
Recent Posts
SAE J1939 Data Acquisition System For Diesel Engines Measures And Records 23 Suspect Parameter Numbers (SPNs)
Posted by on
The Titan S8-CAN by Madgetech (USA) represents a data acquisition system for diesel engines that simultaneously measures and records 23 suspect parameter numbers (SPNs).
The portable data logger suits engine, road, and diagnostic testing applications. It connects to an SAE J1939 network via the diagnostic port and supports the monitoring and recording of SAE J1939 messages between Tier 1 and Tier 4 diesel engines. Furthermore, it captures up to 23 of the 55 available SAE J1939 SPNs simultaneously. In addition, the data logger measures and records temperature, current, voltage, and pulse information. Thus, the tool is helpful for diesel technicians and fleet owners, allowing preventative and predictive maintenance of their vehicle fleets.
The all-in-one solution allows users to view and record data simultaneously without needing a PC or software for operation. The touch-screen user interface allows a comfortable device setup and configuration. The data logger stores up to 5 000 000 readings by utilizing an internal 1 GB memory. A data view from the current logging session is possible as a graph, tabular, or in real-time. The stored data can be viewed, copied, and deleted, and the user can add notes to logged sessions. The collected data can also be downloaded to a flash drive via USB, allowing continuous operation of up to nine hours with the help of an internal battery. The IP20-rated device measures 168.9 mm x 111.8 mm x 35.8 mm (6.7" x 4.4 " x 1.4"). A 16-pin OBDII connector and a nine-pin Deutsch connector are also available.
SAE J1939 Starter Kit and Network Simulator
Our JCOM.J1939 Starter Kit And Network Simulator is designed to allow the experienced engineer as well as the beginner to experiment with SAE J1939 data communication without the need of connecting to a real-world SAE J1939 network, i.e. a diesel engine.
For that reason, our JCOM.J1939 Starter Kit And Network Simulator consists of two SAE J1939 nodes, namely our JCOM.J1939.USB, an SAE J1939 ECU Simulator Board With USB Port. The board supports the full SAE J1939 protocol according to J1939/81 Network Management (Address Claiming) and J1939/21 Transport Protocol (TP).