Site Information

 Loading... Please wait...

Blog

Display for Off-Road Vehicle Engines with J1939 interface

Posted by Industry News on

EngineMonitorPlus - Configurable Monitor for industrial engines with J1939 interface

The EngineMonitorPlus is a display and control device with a CAN Bus interface designed specifically for use in off-road vehicle engines. It supports the most common messages (PGN, Parameter Group Number) of the SAE J1939 standard. Furthermore, it provides a simple configuration of displayed parameters, errors (DM1), and service messages, allowing the user to configure and customize it for specified applications. 

The configuration feature utilizes three pages with two layout options on each page. One quadrant layout value can be switched via buttons or time-based. Values in the row view and four-quadrant layout can be shown simultaneously. In a password-protected menu, the engine control, additionally SCR / DPF regeneration, and SCR / DPF warning lamp can be activated. The software is available for two display variants. With an IP67 grade, both are ideally suited to operate under rough environmental conditions.

Supported parameters include:

  • Engine Percent Load At Current Speed
  • Engine Oil Level
  • Engine Air Inlet Pressure
  • Accelerator Pedal
  • Engine Oil Pressure
  • DPF Active Regen Status
  • Actual Engine - Percent Torque
  • Engine Coolant Pressure
  • Engine Speed
  • Engine Coolant Level
  • Auxiliary Temperature
  • Exhaust High Temp Lamp
  • Engine Fuel Rate
  • Auxiliary Pressure #1
  • Engine Total Hours of Operation
  • Engine Instantaneous Fuel Economy
  • Total Engine Revolutions
  • Engine Average Fuel Economy
  • Wheel-Based Vehicle Speed
  • Engine Trip Fuel
  • Engine Throttle Position
  • Engine Total Fuel Used
  • Barometric Pressure
  • Engine Coolant Temperature
  • And many more…

More Information...


SAE J1939 Starter Kit And Network Simulator

SAE J1939 Starter Kit And Network Simulator

Our J COM.J1939 Starter Kit And Network Simulator is designed to allow the experienced engineer as well as the beginner to experiment with SAE J1939 data communication without the need of connecting to a real-world J1939 network, i.e. a diesel engine. It may sound obvious, but in order to establish a network, you need at least two nodes, and that fact applies especially to CAN/J1939 where the CAN controller will basically shut down after transmitting data without receiving a response. For that reason, our jCOM.J1939 Starter Kit And Network Simulator consists of two J1939 nodes, namely our jCOM.J1939.USB, an SAE J1939 ECU Simulator Board With USB Port.

More Information...

SAE J1939 Display Units for Off-Highway Industrial Engines

The  Enginemonitor displays by B-Plus are expansion tools, especially for industrial engines with SAE J1939 interfaces. They enable users to retrieve information from mobile machines and communicate commands directly. Thanks to their robust housings and protection level, the devices can operate directly in the cab and the outdoor area of mobile machines. Due to various device versions, the [...]

Read More »


Powerful CAN Bus, SAE J1939 Display For On-Board Data Monitoring

Technoton introduced its MasterCAN Display 35, which is designed to visualize the operating parameters of a vehicle or stationary object. The Display 35 receives and parses data from an SAE J1939/S6 interface and standard vehicle T-CAN bus. Two analog inputs allow the connection to voltage/frequency devices – standard or additional sensors like axle load sensor. The MasterCAN [...]

Read More »


TFT Mini Display For Visualization And Recording Of CAN Bus Data

The PCAN-MiniDisplay by PEAK System is a human-machine interface (HMI)for the visualization of CAN Bus data. It comes with two High-speed CAN connectors to connect to the CAN Bus network. The graphical representation of received CAN Bus data is configured before utilizing the unit and prepared for display on its TFT display.The PCAN-MiniDisplay can alternatively operate as [...]

Read More »


SAE J1939 And CAN Bus Display Gauges For Off-Road And On-Road Vehicles

Veethree Technologie (UK) offers a range of CAN Bus and SAE J1939 LCD display gauges. The range of gauges directly wires to an SAE J1939 compliant CAN Bus without needing another device to drive them. Compact and easy to install, the gauges are available in 2″ & 3" sizes, in conventional black or white dial colors with chrome [...]

Read More »