Loading... Please wait...
Blog
Recent Posts
PiCAN2 CAN Bus HAT for Raspberry Pi - Getting Access To The 40-pin GPIO Header
In the past, we had received a number of inquiries regarding the PiCAN2's 40-pin GPIO header, which is designed in a way that it prohibits access to unused GPIOs. Besides the power supply, the PiCAN2 board (one CAN port) itself uses only 6 signals, while the remaining signals cannot be accessed when the board is [...]
Raspberry Pi CPU With CAN Bus Interface Now Upgraded To Raspberry Pi B+
Our Raspberry Pi 3 System With CAN Bus Interface (PiCAN2) has been upgraded to support the new Raspberry Pi B+, and it comes with a pre-installed Raspbian operating system. The system is equipped with either a single or dual PiCAN2 board, and, depending on the selected option, with or without SMPS (Switch Mode Power Supply). The [...]
PiCAN2 CAN Bus Board for Raspberry Pi - Functionality Test
The PiCAN2 board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi. It uses the Microchip MCP2515 CAN Bus controller with MCP2551 CAN Bus transceiver. Connections are made via a 4-way screw terminal or DSUB-9 connector. This board is also available with a 5VDC/1A SMPS (switch mode power supply) that can power both the Pi and [...]
PiCAN2 Duo CAN Bus Board for Raspberry Pi - Functionality Test
The PiCAN2 DUO board provides two independent CAN Bus interfaces for the Raspberry Pi. It uses the Microchip MCP2515 CAN Bus controller with MCP2551 CAN Bus transceiver. Connections are made via a 4-way screw terminal. This board is also available with a 5VDC/1A SMPS (switch mode power supply) that can power both the Pi and the [...]
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868
This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on. Features Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W Supports SMS, phone call, GPRS, [...]
Monitoring SAE J1939 Data Using The Raspberry Pi Plus PiCAN2 CAN Bus Interface Board
During the past years, we have received multiple inquiries in regards to creating an Electronic Logging Device (ELD) using the Raspberry Pi in combination with our PiCAN2 CAN Bus interface board, where the PiCAN is being used to monitor SAE J1939 data.The mere monitoring of SAE J1939 data (Parameter Group Numbers - PGN) is fairly easy, [...]
Raspberry Pi HAT Provides Eight Channels Of Analog Voltage Measurement For Data Acquisition And Data Logger Systems
Measurement Computing Corporation announced the release of their MCC 118 voltage measurement DAQ HAT for the Raspberry Pi. The Raspberry Pi is a single board computer in use today. This growing base of Raspberry Pi users, along with open-source software becoming more industry accepted, is driving growth and making single board computer use more prevalent in professional [...]
Real-Time Ethernet Slave Interface For Raspberry Pi With ProfiNet, Ethernet/IP, EtherCAT Firmware Options
The netHAT module upgrades a Raspberry Pi 2/3/Zero to a Real-Time Ethernet capable slave device allowing the exchange of cyclic process data between an RPi application and a Real-Time Ethernet network. The module is compatible with the Hardware Attached on Top (HAT) specification by the Raspberry Foundation. The RPi and netHAT communicate via the internal SPI0 interface. Due [...]
Ruggedized Raspberry Pi Platform For IIoT Applications Supports ProfiNet, Ethernet/IP, And EtherCAT
The netPI Edge Gateway is a ruggedized Raspberry Pi platform that includes features specifically intended for the industrial manufacturing environment. Chief among these are Real Time Ethernet (RTE) ports supporting PROFINET, EtherNet/IP or EtherCAT, making it suitable for Cloud, Industrial Internet of Things (IIoT) and Industry 4.0 projects.The netPI RTE 3 employs a secure infrastructure that conforms [...]
CAN With Flexible Data Rate (CAN FD) Devices For Embedded Systems Such As Raspberry Pi, Arduino, And Teensy
Developed by Bosch (Germany), CAN with Flexible Data Rate (CAN FD) is an extension to the original CAN Bus protocol as specified in ISO 11898-1 that responds to increased bandwidth requirements in automotive and industrial networks. CAN FD is supported by semiconductor chip manufacturers and end users alike, with Infineon, NXP, Daimler and GM among the [...]