Loading... Please wait...
Recent Posts
SAE J1939 And CAN Bus Display Gauges For Off-Road And On-Road Vehicles
Posted by on
Veethree Technologie (UK) offers a range of CAN Bus and SAE J1939 LCD display gauges. The range of gauges directly wires to an SAE J1939 compliant CAN Bus without needing another device to drive them.
Compact and easy to install, the gauges are available in 2″ & 3" sizes, in conventional black or white dial colors with chrome plated bezels. Custom styles, colors and CAN Bus protocols are also available.
Fully sunlight readable with LCD’s on tachometers, the gauges render outstanding visibility. These sturdy, yet stylish gauges, are built to withstand the demands of off-road and on-road vehicles, and are fully sealed to meet marine IP67 immersion standards and include an anti-fog coating on the inside of the lens to eliminate fogging. The domed glass lenses reduce reflections, also allowing moisture to run off.
LED light piping spreads light uniformly behind the translucent dial and the pointer shaft to maximize night visibility. Keyed housing secures the gauge into dashboards precisely and efficiently, and the gauges are designed and manufactured to the highest standards to satisfy a full range of specifications from temperature and shock, to humidity and overvoltage requirements.
Electrical movements are magnetically shielded to eliminate electrical interference and are CE certified. Silicone dampening reduces pointer bounce caused by vibrations in harsh industrial environments and reverse polarity protection is designed into every Veethree electrical instrument.
SAE J1939 ECU Simulator Board With USB Port
The jCOM.J1939.USB gateway board is a high-performance, low-latency vehicle network adapter for SAE J1939 applications. It allows any host device with a USB COM port to monitor SAE J1939 data traffic and communicate with the SAE J1939 vehicle network.
The board can be easily modified (solder jumpers) to support UART mode instead of USB.
The board supports the full SAE J1939 protocol according to J1939/81 Network Management (Address Claiming) and J1939/21 Transport Protocol (TP). It is also supported by an extensive programming interface for Windows and Linux/Ubuntu applications, including full C/C++/C# source code for short time-to-market developments.
With all its features, the jCOM.J1939.USB allows the simulation of an SAE J1939 ECU (Electronic Control Unit) using embedded solutions such as the Raspberry Pi, BeagleBone, Arduino, Teensy, and others but also PCs running Windows or Linux (incl. Ubuntu, Fedora, etc.).