Guide To Developments And Implementations Of Automotive Ethernet Technology

Learn about the latest developments in automotive Ethernet technology and implementation with this thoroughly revised second edition, which includes approximately twenty-five percent new material and greater technical detail:

• Detailed explanations of how the 100BASE-T1 PHY and 1000 BASE-T1 PHY technologies work
• A step-by-step description of how the 1000BASE-T1 channel was derived
• A summary of the content and applications of the new TSN standards
• A framework for security in Automotive Ethernet
• Discussion of the interrelation between the power supply and automotive Ethernet communication

Industry pioneers share the technical and non-technical decisions that have led to the success of automotive Ethernet, covering everything from electromagnetic requirements and physical layer technologies, Quality of Service, the use of VLANs, IP and Service Discovery, and network architecture and testing.

This book represents a guide for engineers, technical managers and researchers designing components for in-car electronics, and those interested in the strategy of introducing new technologies.

More Information...

PiCAN FD - CAN Bus FD Duo Board with Real Time Clock for Raspberry Pi

This PiCAN FD Duo board provides two-channel CAN-Bus FD capability for the Raspberry Pi. It uses the Microchip MCP2517FD CAN controller with MCP2562FD CAN transceiver. Connection are made via 4-way screw terminal. A real-time clock with battery back up (battery not included) is also on the board.

The advanced CAN FD bitrate extends the length of the data section to up to 64 bytes per frame and a data rate of up to 8 Mbps.

Features

• Microchip MCP2517FD CAN Controller
• Microchip MCP2562FD CAN transceiver
• Arbitration Bit Rate u pto 1Mbps
• Data Bit Rate upto 8Mbps
• CAN FD Controller modes
• Mixed CAN 2.0B and CAN FD mode
• CAN Bus 2.0B mode
• Conforms to ISO 11898-1:2015
• High speed SPI Interface
• CAN Bus connection via 4 way terminal
• 120 Ohm terminator ready
• Serial LCD ready
• LED indicator
• Four fixing holes, comply with Raspberry Pi Hat standard
• SocketCAN driver, appears as can0 to application
• Interrupt RX on GPIO25 and 05
• RTC with battery backup (battery not included) 

More Information...