Loading... Please wait...
Blog
Recent Posts
BroadR-Reach Development Kit With Hardware TCP/IP Protocol Stack
The BroadR-Reach Click by Mikro Elektronika brings the industry-grade communication standard to the mikroBUS™, which is suitable for use in an Ethernet-based open network. The click board utilizes the BCM54811 Transceiver from Broadcom Limited that provides the hardware PHY layer for the Ethernet network. The W3150A+ chip from WizNet, a hardware LSI protocol stack, presents an easy and [...]
ESP32 Mini IoT Development Module with Color LCD, Microphone, Grove Interface, 4MB Flash for Arduino and UIFlow Programming
The M5Stick-C is a mini M5Stack, powered by the ESP32. It represents a portable, easy-to-use, open-source, IoT development module. The M5stickC is one of the core devices in the M5Stack product series as part of a continuously growing hardware and software ecosystem. It comes with a variety of compatible modules, as well as an open-source code and [...]
CAN Bus Termination Adapter Suitable For CAN Bus Interfaces With D-SUB9 Connector
The image below demonstrates a sample CAN Bus network. Two wires, CAN_H and CAN_L, connect all nodes, and the bus line is terminated by resistors, which are typically 120 Ω and are necessary to suppress any electrical reflections on the bus. According to ISO 11898-2, the termination resistor should be in the range of 100…130 Ω but [...]
COM Express Type 6 Module Powered By Intel Core i7/i5/i3 Or Intel Celeron Processor 4305UE For IoT Applications
Axiomtek announced the release of its CEM521, a COM Express Type 6 module powered by the latest 8th generation Intel Core i7/i5/i3 processor or Intel Celeron processor 4305UE (Whiskey Lake-U). It operates under harsh operating conditions with an extended temperature range of -40°C to +85°C (-40°F to +185°F). The 4K-ready system-on-module is suitable for graphics-intensive Industrial [...]
Webinar On Developing Custom Navigation, Localization And Attitude Applications For Autonomous Vehicles, Drones, Robotics
Aceinna and WPG Americas offer a webinar for developers of autonomous vehicle navigation products with CAN Bus interfaces. The webinar will take place on April 23, 2020, at 01:00 PM Eastern Time (US and Canada).The central topic will be about the use of Aceinna’s open-source IMUs (inertial measurement units) for developing guidance solutions for autonomous [...]
CAN Bus Programming With STM32, Developing with FreeRTOS, libopencm3 and GCC
Using FreeRTOS and libopencm3 rather than the Arduino software environment, this book will assist you in developing multi-tasking applications that go beyond Arduino norms. In addition to the standard peripherals found in the typical Arduino device, the STM32 system includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN Bus, and more.Each chapter includes precise [...]
Development Starter Kit For Industrial Machine Vision Artificial Intelligence (AI)
ADLINK Technology has introduced its Vizi-AI with Intel by presenting a development starter kit for industrial machine vision artificial intelligence (AI).The Vizi-AI starter development kit incorporates an Intel-Atom-based SMARC computer module with the Intel Distribution of OpenVINO toolkit and ADLINK Edge software. The development kit is now available through Arrow Electronics in the North America and EMEA [...]
CAN Bus Controllers Quickly & Easily Expand CAN Bus Networks For Machinery
E-T-A's flexible and compact SCS10, SCS20, and SCS30 CAN Bus controllers can plug into industry-standard vehicle sockets without additional wiring and configured using a graphical programming environment. In addition to defining CAN Bus messages, a large number of logical links and time functions are available. The SCS (Smart Control Systems) product group holds intelligent systems, power [...]
CAN Bus Hub With Three Female, One Male D-SUB9 Connector, And Adjustable Termination Resistor
The T-cannector v2 by Kvaser represents a CAN Bus hub with three female and one male D-SUB9 connectors. Used typically in application developments, the device offers an adjustable CAN termination resistor (120 Ohm, 60 Ohm, or unterminated). It renders an affordable and safe way of terminating a CAN Bus circuit, as well as applying power to devices that [...]
Compact Embedded ARM iMX6 UltraLite Computer Supports CAN Bus, Ethernet, USB, RS-232, RS-485
Technologic Systems launched their TS-7100, a small-size single-board computer with an optional DIN-mountable enclosure that measures 2.4" by 3.6" by 1.7". It is powered by the ARM iMX6 UltraLite microprocessor, and it ships with a variety of industry-standard interfaces, including Ethernet, USB, RS-232, RS-485, and CAN Bus. A Linux PC is recommended for development and will be assumed [...]