Loading... Please wait...
Blog
Recent Posts
XMC And PMC CAN Bus interface Board With Four CAN FD Ports
ESD Electronics has expanded their 402 series of CAN boards with two mezzanine systems, XMC and PMC, both providing a CAN Bus interface board with four CAN FD ports. The XMC-CAN/402-4-FD and PMC-CAN/402-4-FD are able to send CAN frames back-to-back over four channels. The interface-boards handle 100 % bus load and support the CAN FD protocol. These cards are [...]
OBD Simulator For OBD-II Software And Hardware Testing And Development
The ECUsim 2000 by ScanTool is an OBD simulator for OBD-II software and hardware testing and development. The 2000 is available in 3 editions which offer varying levels of user control. The Professional & Ultimate editions feature over 40 software commands that provide complete administration of the simulator, and allow you to create custom ECUs, add/delete DTCs [...]
Combined Acceleration Sensor And Gyroscope With SAE J1939 Connectivity
Gemac Chemnitz (Germany) announced their dynamic inclinometer family of products featuring CANopen and SAE J1939 connectivity. The dynamic inclinometers provide angle measurements in moving applications. Combining an acceleration sensor with an angular rate sensor enables inclination measurements with a resolution of 0,01° and an accuracy better than ±2°. The one-dimensional measurement range is 360°, the two-dimensional versions [...]
TFT touch Screen With Two CAN Bus Ports For Use In Commercial Vehicles
MTA introduced their Giotto and Giotto K displays, two off-the-shelf products already programmed with basic software that can be implemented by OEMs using software tools that allow for detailed customization. The customizable displays use an Android-based software. Giotto is a TFT touch screen display while Giotto K is a product that combines a TFT display with a [...]
Coming Soon - CAN-Bus FD Board For Raspberry Pi 3
Developed by Bosch, CAN with Flexible Data-Rate (CAN FD) is an extension to the original CAN protocol as specified in ISO 11898-1, which responds to increased bandwidth requirements in automotive networks. CAN FD has the support of semiconductor chip manufacturers and end users alike, with Infineon, NXP, Daimler and GM among the companies behind the new [...]
Dual Channel Interface Can Be Configured Either As CAN Bus Or LIN
Kvaser's Hybrid 2xCAN/LIN is a flexible, dual channel interface where each channel can be configured independently, either as CAN Bus or LIN (Local Interconnect Network). With a standard USB connector and two high-speed CAN or LIN channels in two separate 9-pin D-SUB CAN connectors, this is a high-performance, yet compact ’universal interface’ that every engineer involved in automotive [...]
Low-Cost, High-Performance Vehicle Network Interface Family With 4 CAN Bus and CAN FD Ports
Intrepid Control Systems, Inc. has announced their ValueCAN4 family, which also provides optional Ethernet (DoIP) and LIN connectivity. The device supports up to 1 Mbit/s for CAN bus connectivity and up to 10 Mbit/s for CAN FD communication. The ISO 11898-2 standard specifies currently transceiver chip parameters for 5 Mbit/s. The dongle family complies with USB 2.0 [...]
SAE J1939 (CAN Bus) To RS232 Gateway With USB Option
We at Copperhill Technologies always thrive in adding more products to our line of OBD-II and SAE J1939 devices. Our current focus is on a SAE J1939 to RS232 gateway that can also easily used to connect to a USB port. The firmware will be identical to that of our SAE J1939 to Bluetooth Gateway With [...]
Controller for Automotive Applications Supports Three CAN Bus Interfaces
The VC36PLC-24 Controller by Vector was specially developed for communications in electrically-powered commercial vehicles. The ECU hardware offers an interface for the standardized communication, e.g. between electric networks or urban trucks and the charging infrastructure. It features a PLC interface and three CAN interfaces for communication including shielding. The controller provides the physical interface to control the Combo-2 connector [...]
How CAN Bus Automatic Baudrate Detection Works And What To Consider When Connecting To A Network
Automatic CAN Bus baudrate detection comes in handy when you need to connect to a CAN network without knowing its actual transmission speed. Rather than playing with CAN baudrate settings and testing if you are able to see data, the automatic detection will deliver the right result within seconds, however, depending on busload. A heavy [...]