Loading... Please wait...
Blog
Recent Posts
CAN Bus Over Ethernet Interface For Internet-of-Things (IoT) Applications
The EtherCAN HS by Kvaser is a real-time Ethernet-to-CAN gateway interface that, when connected over the Internet to an Ethernet-equipped PC, enables remote CAN Bus data access from anywhere in the world. The built-in Power-over-Ethernet eradicates the requirement for a separate power cable when it is not possible to power the device from the CAN Bus network. Kvaser's EtherCAN [...]
Galvanically Isolated CAN Bus Transceivers Protect Networks Against Destructive Energy
High noise levels on a CAN bus network have the potential to destroy CAN bus transceivers. This noise originates mainly from two sources, ground loops and electrical line surges.Protecting a network against this destructive energy requires the galvanic isolation of the CAN bus system from other local node circuitry. For more information on Controller Area [...]
SAE J1939 Address Management Messages (Address Claim PGNs)
The following is an excerpt from A Comprehensible Guide To J1939 by Wilfried Voss. According to SAE J1939/81, network management procedures are used to “collectively manage the network”.While other higher layer protocols based on CAN Bus do not support dynamic node address assignments per default, the SAE J1939 standard provides yet another ingeniously designed feature to uniquely identify ECUs [...]
Windows-Based Analysis And Test Environment For CAN -FD, LIN And Automotive Ethernet
CanEasy by Schleissheimer (Germany) is a Windows-based analysis and test system for CAN-FD, LIN and Automotive Ethernet. The tool simulates serial bus traffic, it provides a high degree of automation and is easily configured and extended with the support of plug-in modules. The goal is that users should focus on their task and not on their tools. CanEasy is a [...]
CAN Bus And CAN FD Bit Rate Calculation App for iOS, Android, and Windows
Peak System, a manufacturer of Classical CAN Bus and CAN FD devices, has released its Bit Rate Calculation Tool for iOS, Android, and Windows.The free-of-charge application determines the register values of a Classical CAN Bus, CAN FD, or SJA1000 CAN Bus controller for user-defined CAN Bus and CAN FD bit rates. Furthermore, the results can be modified [...]
PC/104 Compliant Isolated Controller Area Network (CAN Bus) Peripheral Module
The PCM-CAN-2-ISO board by WINSYSTEMS is a PC/104-compliant, isolated Controller Area Network (CAN Bus) peripheral module.The board utilizes two NXP SJA-1000 CAN controllers with high-level features for use in automotive and industrial applications. The PCM-CAN card uses high-speed data isolation, transformer isolated power supplies, and custom logic to implement independent and user accessible isolated Control Area Network (CAN Bus) interfaces. [...]
SAE J1939 Joystick With Multi-Axis Hand Grip Controller For Off-Road Vehicles And Machinery
The XD series of joysticks by Apem is a multi-axis hand grip controller engineered for demanding vehicle applications in harsh environments, and it supports the SAE J1939 higher-layer CAN Bus protocol.The joystick feature non-contacting Hall effect technologies fit for off‑highway vehicles and machinery. It measures 60 mm below the panel, yet resists horizontal loads of up to 400 [...]
IoT Enabled Single Board Computer Supports Two CAN Bus Ports
The TS-7553-V2 embedded single board computer (SBC) by Technologic Systems presents a solution for low power, cost-effective, Internet-of-Things (IoT) capable, and ready-to-deploy OEM boards with an emphasis on data integrity. The TS-7553-V2 provides the capability to communicate with various network technologies simultaneously from a single device. With the onboard peripherals, the system connects to Ethernet, WiFi, Bluetooth, [...]
SAE J1939 Starter Kit And Network Simulator - Quick Start
Our jCOM.J1939 Starter Kit And Network Simulator is designed to allow the experienced engineer as well as the beginner experimenting with SAE J1939 data communication without the need of connecting to a real-world J1939 network, i.e., a diesel engine. To establish a network, you need at least two nodes, and that fact applies especially to the CAN Bus [...]
CAN Bus PC/104 Peripheral Interface Comes With CAN Bus And CANopen Open Source Libraries For Linux
The TS-CAN1 by Technologic Systems is a PC/104 daughter board which provides a single channel CAN interface and allows a PC/104 embedded system to be connected to CAN Bus networks. The board utilizes the Philips SJA1000 CAN controller which is opto-isolated from the physical CAN Bus network, thus increasing the system reliability. It is also available without opto-isolation, in case [...]