Site Information

 Loading... Please wait...

Blog

SAE J1939 Programmable Data Traffic Simulator For Generating Diesel Engine Signals (PGNs)

The following represents an update on our current development activities, in this case the jCOM.J1939 Programmable Data Traffic Simulator (a first prototype is shown in the image to the left).In short, the plan is that the device is being set up by means of a Windows software and then runs the programmed PGNs (Parameter Group [...]

Read More »


SAE J1939 Starter Kit And Network Simulator - Quick Start

Our  jCOM.J1939 Starter Kit And Network Simulator is designed to allow the experienced engineer as well as the beginner experimenting with SAE J1939 data communication without the need of connecting to a real-world J1939 network, i.e., a diesel engine. To establish a network, you need at least two nodes, and that fact applies especially to the CAN Bus [...]

Read More »


ECU Simulator Generates Eleven Most Frequently Used SAE J1939 Signals For Diesel Engines

The Au J1939 Simulator 1.00A Value Package non-plus Edition generates 11 most frequently used SAE J1939 signals for Diesel Engines. The device supports multiple CAN Bus baud rates (1M/500K/250K/125K/62.5K bps) and can be configured in the field to cover the new SAE 500K CAN Bus baud rate.  Supported SAE J1939 Parameters (PGN) And Features: Engine % Load at Current [...]

Read More »


SAE J1939 Monitoring And ECU Simulation Software Extended By CAN Bus Data Recording Feature

The jCOM1939 Monitor Software by Copperhill Technologies is the perfect tool to monitor, analyze, and simulate SAE J1939 data traffic. The system utilizes our jCOM.J1939.USB board that functions as an SAE J1939 to USB gateway. This comprehensive and easy-to-use, easy-to-understand Windows software displays not only SAE J1939 data traffic; it also allows to scan the network, simulate [...]

Read More »


SAE J1939 ECU Simulator Board - Firmware Update

Our jCOM.J1939.USB gateway board is a high-performance, low-latency vehicle network adapter for SAE J1939 applications. It allows any host device with a USB COM port to monitor SAE J1939 data traffic and communicate with the SAE J1939 vehicle network.  The board supports the full SAE J1939 protocol according to J1939/81 Network Management (Address Claiming) and J1939/21 Transport [...]

Read More »