Loading... Please wait...
Recent Posts
Internet-Of-Things (IoT) Development Board With Cortex M4 Core And Arduino Expansion
Posted by on
The LPC54018 IoT module, developed by NXP in partnership with Embedded Artists, is suitable for applications that require online and cloud access. It also includes software that allows your application to interface with AWS IoT Services.
The module is based on NXP’s LPC54018 microcontroller, which comes with a Cortex-M4 core capable of operating at up to a 180 MHz clock frequency.
The board represents a self-contained, high performance, IEEE802.11 enabled microcontroller module for the development of products employing Amazon FreeRTOS or other IoT (Internet of Things) platforms. The module can be used as a standalone system or plugged into a motherboard or baseboard for rapid product development and prototyping.
The IoT module implements various onboard peripherals for speedy prototyping and evaluation. The onboard peripherals comprise of SDRAM, LCD with touchscreen, audio CODEC, digital microphone, Ethernet PHY, micro SD card slot, and Arduino UNO expansion connectors. The baseboard also includes an onboard debug probe.
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
This HAT for the Raspberry Pi features multi communication functionalities such as GSM, GPRS, GNSS, and Bluetooth.
It enables the Raspberry Pi to easily make telephone calls, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and more.
General Features
- Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
- Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
- Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
- Bluetooth 3.0, supports data transferring through Bluetooth
- Onboard USB TO UART converter CP2102 for UART debugging
- 6x LEDs for indicating the module working status
- SIM card slot for 1.8V/3V SIM card
- RTC with backup battery holder
- Baudrate auto detection (1200bps ~115200bps)
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: GSM 11.14 Release 99
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)