Site Information

 Loading... Please wait...

Fanless Embedded Vehicle, Railway and Marine PC With Four Isolated CAN Bus Ports

Posted by Industry News on

Axiomtek tBOX300-510-FL - Fanless Embedded System with Intel Processor

Axiomtek released their transportation-certified modular embedded system tBOX300-510-FL, which is powered by the onboard 7th gen Intel Core (Kaby Lake) and Intel Celeron 3965U processors.

This railway, vehicle and marine PC supports an industrial grade temperature range and features multiple I/O connectors. It is customizable and expandable with flexible options for value-added modules (VAMs).

This modular embedded system is certified with CE, FCC, EN 50155, EN 50121-3-2, and EN 45545-2, and is compliant with E-Mark, ISO 7637-2, IEC 60945 and DNV 2.4 to ensure the operation. It is suited for multiple transportation-related applications such as truck fleet management, onboard data storage, and passenger communications.

The tBOX300-510-FL is equipped with intelligent power management for ACC on/off delay, shutdown delay and over/under voltage protection. It is built to endure harsh operating environments. It supports a temperature range from -25°C to +70°C and anti-vibration of up to 3 Grms. It also supports a voltage input range: 9V to 36V DC for vehicle applications, 14V to 32V DC for marine applications, and 24V to 110V DC for railway applications.

The choices include a 4-port PoE module; 4-port GbE LAN module; 4-port isolated RS-232/422/485 module; isolated DIO (8-in/8-out) module; 4-port isolated CAN Bus 2.0A/B module; 5-port BNC (4-port video-in and 1-port audio-in) and more. With its external PoE power supply, the transportation system can supports PoE power up to 60W for up to four PoE ports.

More Information...

PiCAN 2 - CAN Interface for Raspberry Pi 2/3

PiCAN 2 - CAN Bus Interface for Raspberry Pi 2/3

This PiCAN2 board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via DB9 or 3-way screw terminal.

There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.


  • CAN v2.0 A/B at 1 Mb/s
  • High speed SPI Interface (10 MHz)
  • Standard and extended data and remote frames
  • CAN connection via standard 9-way sub-D connector or screw terminal
  • Compatible with OBDII cable
  • Solder bridge to set different configuration for DB9 connector
  • 120Ω termination resistor
  • Serial LCD ready
  • LED indicator
  • Foot print for two mini push buttons
  • Four fixing holes, comply with Pi Hat standard
  • SocketCAN driver, appears as can0 to application
  • Interrupt RX on GPIO25

More Information...