Loading... Please wait...
Blog
Recent Posts
CAN FD (CAN Bus with Flexible Data Rate) Prototyping For Embedded Systems Such As Arduino, Raspberry Pi
CAN FD was created to accommodate increases in bandwidth requirements within automotive networks. The CAN FD protocol has brought the software closer to "real time" through the minimization of delays between instruction and transfer of data (latency) and higher bandwidth. CAN FD also allows for more storage capacity in a data frame. While the classic CAN [...]
Interpreting CAN Bus, LIN Bus, RS485, RS232 Networks Per Logic Analyzer
Ikalogic (France) has launched a series of test instruments, including the SP209, a nine-channel, 200‑MHz logic analyzer which can, among other serial technologies, interpret CAN Bus protocols. The series aims to analyze CMOS logic signals and industrial networks alike. The SP209 combines specific receivers for most common industrial systems like CAN Bus, LIN Bus, EIA‑485, or EIA‑232. The [...]
Embedded Computing System based on Freescale i.MX6 Quad Supports Two CAN Bus FD Ports
Janz Tec introduced a series of embedded computers with CAN Bus FD interfaces which can also connect to the IT world.In regards to CAN Bus connectivity, the embedded systems emPC-A/iMX6, emPC-X and the Industrial IoT Gateway series support the CAN FD protocol according to ISO 11898-1:2015, combining the advantages of embedded systems and CAN FD protocols, such as space-saving [...]
2G/3G Rapid Prototyping With ARM Mbed Enabled Internet Of Things Development Kit
The u‑blox C027 application board is an out‑of‑the‑box rapid prototyping solution for IoT (Internet of Things) applications that support GSM, UMTS and CDMA networks. The development board holds a MAX‑M8Q GPS/GNSS receiver and a LISA UMTS/CDMA or SARA GSM cellular module, enabling straightforward development of location‑aware, global communicating applications. For an even more natural development, the C027 incorporates [...]
jCOM.J1939.USB SAE J1939 ECU Simulator Board With USB Port - Firmware Update & Hardware Upgrade
Our jCOM.J1939.USB gateway board is a high-performance, low-latency vehicle network adapter for SAE J1939 applications. It allows any host device with a USB COM port the monitoring of SAE J1939 data traffic and communication with an SAE J1939 vehicle network.The board supports the full SAE J1939 protocol according to J1939/81 Network Management (Address Claiming) and J1939/21 Transport [...]
Embedded IoT Gateway Connects CAN Bus FD To The Cloud Per LTE Or WLAN
Janz Tec (Germany) has developed the emIOT-A/iMX6 gateway. It connects CAN FD networks with wireless communication networks such as LTE and WLAN. Besides its CAN-PMC/FD and CAN-PCIe/FD boards, Janz Tec offers the IIoT (Industrial Internet of Things) gateway with CAN FD interfaces. The CAN FD interface is ISO 11898-1:2015 compliant. The extended temperature range of -40 °C to [...]
Controller Area Network - CAN Bus Message Broadcasting With Data Frames
The following is an excerpt from A Comprehensible Controller Area Network by Wilfried Voss. The broadcasting of messages in a CAN Bus network is based on a producer-consumer principle. One node, when sending a message, will be the producer while all other nodes are the consumers. All nodes in a CAN Bus network receive the same message at the [...]
Use Powerful Python Libraries To Implement Machine Learning And Deep Learning
Machine learning is starting to dominate the software world, and now deep learning is reaching machine learning. Experience and perform at the cutting edge of machine learning, neural networks, and deep learning with this second edition of Sebastian Raschka's bestselling book, Python Machine Learning. Thoroughly updated using the latest Python open source libraries, this book offers useful [...]
Bluetooth OBD2 Scanner Turns iPhone, iPad, Android, Kindle Fire or Windows Device Into Diagnostic Scan Tool
This Bluetooth OBD2 scanner gives you more codes and advanced parameters than any other wireless OBD scanner - Unlimited FREE OEM data upgrades for Ford, GM, Mazda, Nissan/Infiniti, Toyota/Lexus/Scion vehicles. The OBDLink MX+ reads and clears codes on all 1996 and newer OBD-II compliant vehicles. The OBDLink App (included) provides advanced diagnostics, trip logging, multi-parameter graphing, customizable gauges, [...]
ECU Simulator Generates Eleven Most Frequently Used SAE J1939 Signals For Diesel Engines
The Au J1939 Simulator 1.00A Value Package non-plus Edition generates 11 most frequently used SAE J1939 signals for Diesel Engines. The device supports multiple CAN Bus baud rates (1M/500K/250K/125K/62.5K bps) and can be configured in the field to cover the new SAE 500K CAN Bus baud rate. Supported SAE J1939 Parameters (PGN) And Features: Engine % Load at Current [...]