Loading... Please wait...
)
Product Description
Develop and test LIN and CAN applications with this compact interface board, supplied with a Teensy 4.0 already installed. Two LIN channels and support for either Classical CAN or CAN FD make it a practical platform for automotive network experiments, embedded development, and bench testing.
The board includes the CAN FD and LIN transceivers, an onboard 5 V regulator, reverse supply voltage protection, and ESD protection. It operates from a 7–12 V DC supply.
Features
-
Teensy 4.0 microcontroller board included and installed
-
CAN interface supporting Classical CAN or CAN FD
-
120 Ω CAN termination resistor
-
Two LIN channels using Microchip MCP2004A transceivers
-
LIN communication speeds up to 20 kbaud
-
Onboard 5 V regulator with 7–12 V DC input
-
Reverse supply voltage and ESD protection
About LIN
LIN (Local Interconnect Network) is a low-cost, single-wire communication network widely used in vehicles to connect sensors, switches, and actuators. Operating at speeds up to 20 kbit/s, it complements CAN for devices that require relatively modest data rates.
About Teensy
Teensy is a family of compact, USB-programmable microcontroller development boards from PJRC. The included Teensy 4.0 features a 600 MHz Arm Cortex-M7 processor and can be programmed using the Arduino IDE with Teensy software support, providing a powerful foundation for custom communication and control applications.
