Loading... Please wait...
Blog
Recent Posts
Under Development: Galvanically Isolated Quad Channel CAN Bus to USB Gateway For Industrial And Automotive Applications
A few months ago, we introduced a development concept for an Automotive Network Development System with CAN, CAN FD, LIN, Ethernet. After further market research plus very much appreciated feedback from customers, we decided to modify the concept and basically create two devices, one for CAN and LIN, the other to CAN and Ethernet. Ethernet, in [...]
Powerful CAN Bus, SAE J1939 Display For On-Board Data Monitoring
Technoton introduced its MasterCAN Display 35, which is designed to visualize the operating parameters of a vehicle or stationary object. The Display 35 receives and parses data from an SAE J1939/S6 interface and standard vehicle T-CAN bus. Two analog inputs allow the connection to voltage/frequency devices – standard or additional sensors like axle load sensor. The MasterCAN [...]
Linux Based LTE Gateway For IoT Applications Supports CAN Bus Interface
IoTmaxx (Germany) introduced its Maxx GW 4100 4-G mobile radio gateway with CAN Bus interface. The „always-online" functionality establishes a connection to the device autonomously or reestablishes the link in case of a failure. The two integrated SIM card slots provide mobile network operator redundancy. The received data is buffered in the internal memory of the [...]
SAE J1939 Gateway And Data Logger With Real-Time Clock - Update 09-04-2020
Our SAE J1939 Gateway And Data Logger is ideal for vehicle fleet management (trucks, buses, agricultural equipment, and any other diesel engine application), prototype field testing, diagnostics, or reverse engineering. The SAE J1939 Gateway And Data Logger records SAE J1939 message frames (PGNs) onto an onboard MicroSD memory card and timestamps them with a real-time clock (RTC). [...]
Arduino Based CAN Bus, LIN Bus Development And Prototyping Boards For Automotive And Industrial Applications
Teensy is a line of Arduino-compatible boards designed to offer maximum I/O capabilities, backed up by a slew of fully featured software libraries designed to run on Arduino. The Teensy is a complete USB-based microcontroller development system in a minimal footprint, and it is capable of implementing many types of projects. All programming is done [...]
SAE J1939 Electronic Logging Device (ELD) Simulation And Data Monitoring With Timestamp Under Linux
The following describes a method of sampling and recording SAE J1939 data to any Linux device, PC or Embedded. Naturally, in order to read and request SAE J1939 data, you will need additional hardware, such as a CAN Bus (Controller Area Network) interface board (unless you use an embedded Linux system with onboard CAN port). The [...]
Updated Version Of JCOM1939 Windows Software For Monitoring And Recording SAE J1939 Data Traffic
The JCOM1939 Monitor Software for Windows complements our JCOM.J1939.USB gateway board, a high-performance, low-latency vehicle network adapter for SAE J1939 applications. The gateway allows any host device with a USB COM port to monitor and record SAE J1939 data traffic and communicate with an SAE J1939 vehicle network. The board supports the full SAE J1939 protocol according to J1939/81 [...]
SAE J1939 Gateway - Updated Firmware And New Windows Data Monitoring & Recording Software
The JCOM.J939.USB-X SAE J1939 Processor board is an extended version of our popular JCOM.J9139.USB-B SAE J1939 ECU Simulator Board With USB Port. The most significant difference is that the -X version supports a USB transfer rate of up to 480 Mbps, allowing higher data throughput. The onboard real-time clock supports the timestamping of the SAE J1939 [...]
IoT Enabled ESP32 Module Supports Wireless CAN, SAE J1939, NMEA 2000 Applications
Copperhill Technologies introduces the ESP32 WiFi, Bluetooth Classic, BLE, CAN Bus Module to support IoT (Internet of Things) applications connected to CAN Bus, SAE J1939, and NMEA 2000 serial networks. The ESP32 is a series of low-cost, low-power system-on-chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth. It opened the door to a multitude of low-cost, high-efficiency IoT [...]
IoT-Enabled (Internet of Things) Controller Series For Harsh Environments Supports SAE J1939 And NMEA 2000
Divelbiss announced the introduction of its HEC-P2000 series of IoT-enabled (Internet of Things) controllers for harsh environments, including support for the SAE J1939 and NMEA 2000 serial protocols.The controllers are programmed using the Divelbiss' free-of-charge EZ Ladder toolkit, supporting programming languages such as Ladder Diagram, Function Block, and Structured Text, based on the P-Series PLC-on-a-chip (Programmable [...]