Loading... Please wait...
Recent Posts
Intel Apollo Lake Celeron Industrial Embedded Board Suitable For In-Vehicle Applications
Posted by on
The EMB-7610 from Estone Technology is a proprietary form factor board, 160mm x 90mm in size and designed with applications such as Digital Surveillance, In-Vehicle Electronics, Industrial Automation, Retail and Medical Technologies in mind.
The fanless design operates at temperatures up to 140° F in a combination of up to 95% humidity. The board can adapt to a variety of applications with built-in support for Windows 10, Windows 10 IoT, or Ubuntu Linux.
The EMB-7610 operates around efficient Intel Celeron chips – available with either the Dual Core N3350 or Quad Core N3450. The chips natively support a variety of connectivity, and the EMB-7610 takes full advantage – featuring an RS-232/285 terminal block, an RS-232 header, two USB 2.0 Type A ports and four additional USB 2.0 headers, one MicroUSB 2.0 port, and four or more GPIO connections. Display connectivity via two I2C ports and an additional MIPI-CSI and an ALC662 Audio Codec supports up to 6W per audio channel.
24bit LVDS, eDP or MIPI, power, backlight controls, and touch panel interfaces for screens are all located in a single FPC connector for developer integration with all types of industrial and touch panel PC uses. The Intel processor maintains a MIPI-CSI input and MIPI-DSI output, integrated audio inputs and outputs, as well as up to 3 independent displays in sizes from 7” to 10.1” or more.
Key Features
- Intel Celeron N3350 or N3450 Apollo Lake processor
- Dual Gigabit Ethernet ports, one support POE modules
- SO-DIMM DDR3L up to 8G, micro SD slot, SATA and m.2 SATA ports
- LVDS, eDP, MIPI DSI for LCD panel support, built-in touch controller
- Ultra small form factor and ultra slim configuration option
- Rich I/O with RS-232/485, I2C, and USB ports
Raspberry Pi 3 System With Dual Isolated CAN Bus Interface
Our Raspberry Pi 3 System With CAN Bus Interface (PiCAN2) comes with a pre-installed Raspbian operating system.
The PiCAN2 DUO ISO board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi.
It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via 4-way screw terminals.
There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.
System Features
- Raspberry Pi 3, Model B+, 1 GB RAM.
- Raspberry Pi 8GB Preloaded (NOOBS) SD Card - SanDisk Extreme 8GB microSDHC UHS-1 with speed up to 48 MB/sec.
- PiCAN2 - CAN Bus Interface for Raspberry Pi.
- The enclosure is made from High Impact Polystyrene HIPS UL94-HB material. Mounting flanges allow for wall mounting.