The LuckFox Pico represents a cost-effective Linux micro development board based on the Rockship RV1103 chip, which supplies a straightforward and efficient development platform for embedded system designers. It supports a variety of interfaces, including MIPI CSI, GPIO, UART, SPI, I2C, USB, and more. Developing applications is convenient, and debugging is quick.

Features

• The single-core ARM Cortex-A7 32-bit core comes with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU features high computing accuracy, supporting int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4.
  
• Built-in self-developed third-generation ISP3.2 supports 4-megapixel, with numerous image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, and more.
  
• Features powerful encoding performance, sustains intelligent encoding mode and adaptive stream saving according to the scene, and saves more than 50% of the bit rate of the conventional CBR mode. The images from the camera are high-definition with a smaller size, effectively doubling the storage capacity.
  
• The built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms quick picture capture, and loads AI model library simultaneously to realize face recognition "in one second." There is a built-in 16-bit DRAM DDR2 capable of sustaining challenging memory bandwidths. It is integrated with built-in POR, audio codec, and MAC PHY.

More Information...

Teensy 4.0 Triple Board with Two CAN 2.0B And One CAN FD Port With 240x240 IPS LCD And MicroSD

The Teensy 4.0 is an Arduino-compatible board with an Arm Cortex-M7 microcontroller running at 600 MHz. The board is compatible with the Arduino IDE and the Arduino library. In most cases, code written for another Arduino board works with a minimum of changes on a Teensy. The Teensy 4.0 Triple CAN Bus Board with 240x240 IPS LCD And MicroSD is a Teensy 4.0 board with triple CAN Bus connections, two Classical CAN 2.0B, and one CAN FD. It can be powered by an external +12 VDC power supply with reverse voltage protection. Also included is a 240x240 wide-angle IPS TFT LCD display with microSD holder.

More Information...