Loading... Please wait...
Blog
Recent Posts
CAN FD To USB Gateway Project With Teensy 3.2 And Microchip MCP2517FD CAN FD Controller
Our Teensy 3.2 With CAN FD Breakout Board provides all the components needed to create your CAN FD to USB-Micro Gateway. The board comes with the Microchip MCP2517FD CAN FD controller, while the Teensy 3.2 provides the USB connection. It also has an onboard 5 VDC regulator and reverse-voltage protection. The MCP2517FD is a cost-effective and small-footprint CAN [...]
CAN Bus To Ethernet TCP/IP Gateway Also Supports Bridge Mode
The EtherCAN/2 by esd electronics is a hat-rail mounted gateway that exchanges data between CAN Bus and Ethernet networks. In bridge mode, two EtherCAN/2 modules can be used to connect two CAN Bus networks via TCP/IP.The unit comes with one Ethernet interface (10/100 Mbit/s, RJ45) and one CAN Bus high speed (ISO 11898-2) compatible interface (20 kBit/s up [...]
Industrial-Strength USB To RS232, RS485, TTL (UART) Isolated Converter
WaveShare introduced their industrial USB to RS232/485/TTL isolated converter with original FT232RL. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, and more. Also, the USB TO RS232/485/TTL gateway comes with an aluminum alloy enclosure, making it robust and durable for industrial requirements.The USB TO RS232/485/TTL converter is very easy [...]
jCOM.J1939.USB SAE J1939 ECU Simulator Board With USB Port - Firmware Update & Hardware Upgrade
Our jCOM.J1939.USB gateway board is a high-performance, low-latency vehicle network adapter for SAE J1939 applications. It allows any host device with a USB COM port the monitoring of SAE J1939 data traffic and communication with an SAE J1939 vehicle network.The board supports the full SAE J1939 protocol according to J1939/81 Network Management (Address Claiming) and J1939/21 Transport [...]
LIN Bus To USB Gateway Simulates LIN Master Or LIN Slave
The Baby-LIN-II device by Lipowsky Industrie-Elektronik is a small but powerful system to control a LIN Bus via USB. It simulates LIN Bus master or LIN Bus slave nodes. The electrically-isolated LIN interface bypasses problems in noisy electrical environments.The device also supports stand-alone operation without a PC. A durability test sequence can be defined as a macro and [...]
SAE J1939 (CAN Bus) to Modbus, PROFINET, EtherNet-IP Gateways Connect PLCs To Vehicle Engines
Moxa's MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which uses the CAN Bus (Controller Area Network) technology as a hardware layer. SAE J1939 is used to perform communication and diagnostics between vehicle components, diesel engine generators, and compression engines, and it is suitable for the heavy-duty truck industry and backup power systems. It is now customary [...]
Protocol Gateway Converts CAN Bus Message Frames Into Profinet I/O Data
Integrate your CAN-Bus-based industrial devices and equipment into a PROFINET control system without the necessity for any changes to the device. Just connect and configure.The Anybus Communicator is a proven and trusted protocol converter gateway connecting devices with a CAN-Bus-based protocol to PROFINET. The gateway performs quick protocol conversion and presents the CAN Bus data to the PLC/Controller [...]
Programmable CAN Bus To RS232 Gateway For Communication Between Controllers
The b-CANCubeNano by b-plus is a fitting gateway for serial data communication between CAN Bus and EIA-232 networks.The product was designed primarily for the use in vehicles and mobile machines. It features a CAN Bus interface according to ISO 11898-2 to communicate, for instance, with other machine controllers. It also maintains an EIA-232 serial interface to interact with other serial [...]
Local Interconnect Network (LIN) To Controller Area Network (CAN Bus) Converter
The LIN (Local Interconnect Network) bus is an inexpensive serial communications protocol, which effectively supports remote application within a car's network. It is particularly intended for mechatronic nodes in distributed automotive applications, but is equally suited to industrial applications. It is intended to complement the existing CAN network leading to hierarchical networks within cars.Controller Area Network [...]
Telematics Gateway For Fleet Management Supports CAN Bus Interface
Scale and Control Inc. (SCI) offers a telematics gateway and a database for fleet management purposes. The gateway is also equipped with a CAN Bus interface.The module offers a dynamic solution for small and large fleet operations. According to SCI, the hardware and software solution will help with reducing maintenance costs. The telematics gateway enables remote [...]