Site Information

 Loading... Please wait...

CAN Bus Shield for Arduino, Mbed Platform With Fault-Tolerant MAX33040E CAN Transceiver

Posted by Industry News on

maxim integrated - MAX33040ESHLD Evaluation Kit for the MAX33040E CAN Bus Transceiver

The MAX33040Eshld shield evaluation kit by maxim integrated represents a demonstration and development platform for the MAX33040E CAN Bus transceiver. It serves as a standalone evaluation board and the Mbed or Arduino platform to communicate with a CAN Bus network. The board features test points to access critical signal pins of the transceiver. The MAX14931 digital isolator is used as a level translator with a 1.71 VDC to 5.5 VDC supply range which also feeds the micro-controller. The onboard microSD card socket supports OBD-II (vehicle diagnostics) applications.

The MAX33040E/MAX33041E are +3.3 VDC Controller Area Network (CAN) transceivers with integrated protection for industrial applications. These devices possess extended ±40V fault protection on CAN_H and CAN_L for equipment where overvoltage protection is required. They also incorporate high ±40 kV ESD HBM and an input common-mode range (CMR) of ±25V on CAN_H and CAN_L, exceeding the ISO 11898-2 CAN Standard of -2V to +7V. This makes these parts well suited for applications enduring moderate electrical noise, influencing the ground levels between two nodes or systems. The transceiver features a shutdown pin and a multifunction standby pin.

Key Features

  • Easy Evaluation of the MAX33040E CAN Bus Transceiver
  • I/O Interface Compatibility from 1.71 VDC to 5.5 VDC
  • Proven PCB Layout
  • Mbed™/Arduino® Platform +
  • Fully Assembled and Tested

More Information...


Teensy 4.0 Triple CAN Bus Board With Two CAN 2.0B And One CAN FD Port

Teensy 4.0 Triple CAN Bus Board With Two CAN 2.0B And One CAN FD Port

The Teensy 4.0 Triple CAN Bus Board is a Teensy 4.0 board with triple CAN Bus connections, two Classical CAN 2.0B, and one CAN FD. It can be powered by an external +12 VDC power supply with reverse voltage protection.

The Teensy 4.0 is an Arduino-compatible board with an Arm Cortex-M7 microcontroller running at 600 MHz. The board is compatible with the Arduino IDE and the Arduino library. In most cases, code written for another Arduino board works with a minimum of changes on a Teensy.

More Information...