Site Information

 Loading... Please wait...

Industrial Linux SBC With ARM Processor Supports WiFi, Bluetooth Plus Two CAN Bus Interfaces

Posted by Industry News on

Technologic Systems TS-7680 Low Power Industrial SBC with AC Power, Relays & WiFi+BT.jpeg

Technologic Systems introduced their TS-7680, an embedded computer system powered by a 454 MHz ARM CPU that offers a great balance between industrial features, such as a 24-position rugged screw terminal connector and 3-Amp relays, and high-end capabilities, such as WiFi and Bluetooth. The TS-7680 offers low power and low cost at industrial grade, including industrial temperature operation and rugged enclosure with DIN mount. Power input allows 8 to 40 VDC as well as 10 to 28 VAC, making this product also suitable for the HVAC and building automation and control systems industry. Additional features include 2 x 10/100 Ethernet ports, 1x micro SD socket, 4 GB eMMC Flash, 2 x USB Host, 2 CAN Bus ports, 2 x RS-485, high precision, battery-backed RTC, 30V tolerant DIO, analog IO, BACnet, and more. The TS-7680 also offers a sub-watt low power operation mode as well as sleep mode for even lower power consumption. The TS-7680 ships with Linux 3.14.28 and Debian Jessie running out of the box on the onboard flash storage.

Features

  • Full Industrial temperature range (-40 °C to 85 °C)
  • 4GB MLC eMMC flash storage OR
  • 2GB SLC eMMC flash storage (via software utility)
  • WiFi 802.11b/g/n and Bluetooth 2.1+EDR (4.0 BLE) (with hardware handshaking)
  • BACnet protocol support
  • Real Time Clock (RTC)
  • Optional TS-SILO to provide 20 - 60 seconds of power hold
  • Optional accelerometer
  • 1 x USB serial device for console
  • 2 x RS-232 ports
  • 2 x RS-485 ports
  • 24-position rugged screw terminal connector
    • 4x DAC (0 - 10 V) to drive control functions
    • 4x ADC (0 - 10 V)
  • 16 Pin header for daughter boards
  • 38 Pin expansion header featuring:
    • 4-20 mA receivers
    • 1 x RS-485
    • 2 x CAN
    • Transformer driver for isolated power supply
    • 1x Relay

More Information


Raspberry Pi 3 System With Dual CAN Bus Interface

Raspberry Pi 3 System With Dual CAN Bus Interface

Our Raspberry Pi 3 System With CAN Bus Interface (PiCAN2) comes with a pre-installed Raspbian operating system (Debian Jessie).

The PiCAN2 board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via 4-way screw terminals.

There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.

More Information...