- Home
- CAN Interfaces
- Raspberry Pi Zero System With Dual CAN Bus Interface
Product Description
Sorry, but this product no longer available!
Our Raspberry Pi Zero System With CAN Bus Interface (PiCAN2) comes with a pre-installed Raspbian operating system, plus all CAN driver settings are pre-installed and ready to go.
System Features
- Raspberry Pi Zero
- Raspberry Pi 8GB Preloaded (NOOBS) SD Card - SanDisk Extreme 8GB microSDHC UHS-1 with speed up to 48 MB/sec.
- PiCAN2 - CAN Bus Interface for Raspberry Pi with 2 CAN ports.
- Extended input power option - 6 VDC to 30 VDC.
Raspberry Pi Zero
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!
- 1GHz, Single-core CPU
- 512MB RAM
- Mini-HDMI port
- Micro-USB OTG port
- Micro-USB power
- HAT-compatible 40-pin header
- Composite video and reset headers
- CSI camera connector
The included PiCAN2 board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via DB9 or 3-way screw terminal.
There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.
PiCAN2 Features
- CAN v2.0 A/B at 1 Mb/s
- High speed SPI Interface (10 MHz)
- Standard and extended data and remote frames
- CAN connection via standard 9-way sub-D connector or screw terminal
- Compatible with OBDII cable
- Solder bridge to set different configuration for DB9 connector
- 120Ω termination resistor
- Serial LCD ready
- LED indicator
- Foot print for two mini push buttons
- Four fixing holes, comply with Pi Hat standard
- SocketCAN driver, appears as can0 to application
- Interrupt RX on GPIO25
Debian Jessie Modifications
PiCAN2 Documents
Recommended Literature:
- Programming the Raspberry Pi, Second Edition: Getting Started with Python
- Raspberry Pi User Guide
- Raspberry Pi Projects for the Evil Genius
Other resources:
- What is Debian Jessie?
- Raspberry Pi Proven To Withstand Extended Temperature Range
- SAE J1939 ECU Simulator and Data Monitor for Raspberry Pi
Cables:
- OBD2 16Pin to DB9 Adapter Cable - Use Board Settings for OBD-II
- SAE J1939 9pin Cable to DB9 Female - Use Board Settings for Standard CAN
Programming the Raspberry Pi - Getting Started with Python
Learn to create inventive programs and fun games on your powerful Raspberry Pi―with no programming experience required. This practical book has been revised to fully cover the new Raspberry Pi 2, including upgrades to the Raspbian operating system. Discover how to configure hardware and software, write Python scripts, create user-friendly GUIs, and control external electronics. DIY projects include a hangman game, RGB LED controller, digital clock, and RasPiRobot complete with an ultrasonic rangefinder.
- Updated for Raspberry Pi 2
- Set up your Raspberry Pi and explore its features
- Navigate files, folders, and menus
- Write Python programs using the IDLE editor
- Use strings, lists, functions, and dictionaries
- Work with modules, classes, and methods
- Create user-friendly games using Pygame
- Build intuitive user interfaces with Tkinter
- Attach external electronics through the GPIO port
- Add powerful Web features to your projects
Product Reviews
Find Similar Products by Category
Customers also viewed
-
$155.95
-
$49.95
-
-
$89.95
-
$112.95