LPC1768 Mini-DK2 Development Board
Free Shipping Within The United States!
The LPC1768 Mini-DK2 is a small evaluation board production by Haoyu Electronic; it is based on the NXP Semiconductors LPC1700 series processors (Cortex-M3 core).
The LPC1768 Mini-DK2 clock can be set up to 100MHZ; it contains an Ethernet interface, USB HOST / device interface, UART interface, SPI LCD interface, and a 16-bit parallel LCD interface (LCD is not part of the delivery).
The LPC176x/5x are Cortex-M3 microcontrollers for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz (120 MHz for LPC1769 and 1759). Features include up to 512 kB of flash memory, up to 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC176x are pin-compatible to the 100-pin LPC236x ARM7 series.
The NXP LPC1700 microcontroller series offers the following features
- Support for communication peripherals including 10/100 Ethernet, USB On-The-Go/Host/Device and two CAN interfaces, all of which can operate simultaneously and without bus contention
- A true 12-bit analog-to-digital converter (ADC) and 10-bit digital-to-analog converter (DAC)
- Fast-Mode Plus (1 Mb/s) I2C bus, in addition to 4 UARTs, 3 SPI/SSP buses and an I2S bus
- Real-Time Clock operating at less than 1 uA
- A Memory Protection Unit (MPU) allowing memory regions to be defined as read-only and protect them from corruption
- A Quadrature Encoder Interface and Motor Control Pulse Width Modulator (PWM) for flexible, powerful motor control
- Revision 2 Cortex-M3 core with enhanced power down capabilities, including Wake-up Interrupt Controller
- Pin compatibility with the NXP LPC2300 ARM7 microcontrollers series
The LPC1768 Mini-DK2 board provides
- One serial interface, use CP2102 (USB to RS232 interface, support ISP download).
- RJ45-10/100M Ethernet network interface (Ethernet PHY: LAN8720A).
- 2.8 inch TFT color LCD interface (SPI interface or 16Bit parallel interface, LCD not included)
- USB 2.0 interface, USB host and USB Device interface.
- TF SD / MMC card (SPI) interface.
- Two user button, One Reset button and ISP button , one INT0 button, two user-programmable LED lights.
- Serial ISP download, Standard 20-pin JTAG download simulation debugging interface.
- External 5V power supply or USB 5V supply.
- Board size: 95mm * 78mm.
- Expansion of all processor IO to header pins.
- LPC1768 Mini-DK2 development board
- Ethernet cable
- Mini USB to USB-A conversion cable
- Software and Example Code CDROM LPC1768 Mini-DK2
Note: 537.6 MB size. The programming samples are provided by the manufacturer. We strongly recommend a virus scan before accessing the code.
LPCXpresso IDE (Free-of-charge)
- LPCXpresso Introduction
- LPCXpresso IDE Download
- LPCXpresso IDE Installation Guide (PDF...)
- LPCXpresso IDE User Guide (PDF...)
In order to program the LPC1768 Mini-DK2 Development Board through the LPCXpresso IDE, the following components are required:
The Definitive Guide to ARM Cortex-M3 and Cortex-M4 Processors
by Joseph Yiu
This new edition has been fully revised and updated to include extensive information on the ARM Cortex-M4 processor, providing a complete up-to-date guide to both Cortex-M3 and Cortex-M4 processors, and which enables migration from various processor architectures to the exciting world of the Cortex-M3 and M4.
This book presents the background of the ARM architecture and outlines the features of the processors such as the instruction set, interrupt-handling and also demonstrates how to program and utilize the advanced features available such as the Memory Protection Unit (MPU).
Chapters on getting started with IAR, Keil, gcc and CooCox CoIDE tools help beginners develop program codes. Coverage also includes the important areas of software development such as using the low power features, handling information input/output, mixed language projects with assembly and C, and other advanced topics.
- Two new chapters on DSP features and CMSIS-DSP software libraries, covering DSP fundamentals and how to write DSP software for the Cortex-M4 processor, including examples of using the CMSIS-DSP library, as well as useful information about the DSP capability of the Cortex-M4 processor
- A new chapter on the Cortex-M4 floating point unit and how to use it
- A new chapter on using embedded OS (based on CMSIS-RTOS), as well as details of processor features to support OS operations
- Various debugging techniques as well as a troubleshooting guide in the appendix
- Topics on software porting from other architectures
- A full range of easy-to-understand examples, diagrams and quick reference appendices