Site Information

 Loading... Please wait...

Blog

3.5" SubCompact Board With 8th Generation Intel® Core™ i7/i5/i3/Celeron® Processor SoC

AAEON, a designer and manufacturer of advanced industrial and embedded computing platforms, introduced its GENE-WHU6 subcompact board, powered by 8th Generation Intel Core processors. Despite its size, the board provides extended functionality, and it can deliver the versatility of a desktop system.GENE-WHU6 fuses processing power with up to 32GB of DDR4 SODIMM RAM for computing performance.Designed for [...]

Read More »


The Benefits Of Controller Area Network - CAN Bus - For Embedded Applications

The following is an excerpt from  A Comprehensible Controller Area Network by Wilfried Voss. Controller Area Network, like any field-bus system based on serial communication, will reduce wiring, which was initially considered only as an advantageous side effect.  Distributed control, i.e., the use of a multi-processor system, will consequently result in increased performance, and the vastly reduced costs [...]

Read More »


IMB520R ATX Motherboard with LGA1151 Socket 9th/8th Gen Intel® Core™ Processor

Axiomtek introduced their IMB520R and IMB521R, which are industrial-strength ATX motherboards powered by the LGA1151 socket 9th and 8th generation Intel Core i7/i5/i3 (Coffee Lake Refresh), Intel Pentium or Intel Celeron processor with the Intel Q370 chipset (IMB520R) or Intel C246 chipset (IMB521R). The motherboards provide a design with high functionality, and they offer various expansion interfaces, [...]

Read More »


C Programming For The Internet-Of-Things (IoT) Under Linux

Applying C is the book you need if you are programming for Single Board Computers (SBCs) that operate under Linux, or if you perform any coding in C that interacts with the hardware. As there is not the right name for this body of knowledge, it is not easy to find a single source for [...]

Read More »


COM Express Type 6 Basic Module For Industrial IoT Applications

Axiomtek announced the release of its CEM520, a COM Express Type 6 basic module featuring triple independent displays, industrial operating temperature range, and plenty of possibilities for expansions. The CEM520 utilizes the Intel Xeon E-2176M and 8th generation Intel Core i7/i5/i3 processors (codename: Coffee Lake) with the Intel CM246/QM370/HM370 chipset. The 125 x 95 mm system-on-module [...]

Read More »


Arduino Compatible LIN Bus And CAN Bus Development Kit

LIN (Local Interconnect Network) is a serial network protocol used for communication between components in vehicles. The demand for a second serial network emerged as the technologies and the facilities implemented in modern cars grew, while the CAN Bus was too expensive to implement for every component in the car.The Arduino Compatible LIN Bus And CAN [...]

Read More »


COM Express Compact Type 6 with 8th Gen Intel Core ULT SoC

AAEON announced the release of its COM-WHUC6 COM Express module. The COM-WHUC6 utilizes the Compact Type 6 form factor, and it is designed to perform in a variety of applications, from automation to mobile operations. The COM-WHUC6 is powered by the 8th Generation Intel Core i7/i5/i3 and Celeron ULT series processors (formerly Whiskey Lake), rendering performance for [...]

Read More »


Analog Signal Output Controller With CAN Bus And SAE J1939 Port

Axiomatic has announced its AX130770, an ECU System converting CAN Bus data to two analog or digital isolated signals and one relay output for rugged engine applications.The relay output converter connects to a CAN Bus vehicle network (SAE J1939, high-speed SAE J1939m, or CANopen). It accommodates two analog/digital isolated signal outputs, which can be configured as 0 [...]

Read More »


LIN To CAN Bus Gateway - Prototyping And Firmware Development With The Arduino-Compatible Teensy Board

In general, let's start with a brief comparison of  CAN Bus (Controller Area Network) and LIN Bus (Local Interconnect Network): LIN Bus networks provide cost-efficient communication in applications where the bandwidth and versatility of the CAN Bus technology are not required.  LIN Bus applications are relatively inexpensive using the standard serial universal asynchronous receiver/transmitter (UART) technology, which are embedded [...]

Read More »


SMARC 2.0 Computer-On-Module Based On NXP i.MX 8M Nano Processor Series

congatec, a vendor of standard and customized embedded computer boards and modules, introduced its SMARC 2.0 Computer-on-Module utilizing an ARM Cortex-A53based NXP i.MX 8M Nano processor. The conga-SMX8-Nano represents a low-end performance class for SMARC. With its graphics capacities as well as its decreased number of I/Os, the NXP i.MX 8M Mini compatible NXP i.MX 8M Nano [...]

Read More »